scared to start engine,

[Bluethunder3320]

funny, im scared to use (my) paintball gun since last time i used it a metal piece shot out the back and fired into my wall in my room. well i sold it to my friend for $10, he rebuilt it and another piece backfired lol.

ever see that thousand ways to die episode where the kids paintball tank threads strip out and it fires off into his friend and smacks his face and he dies. lol.

i loose parts all the time too! especially tools.

 

[kendelrk]

haha its like, where the hell is that wrench, what the **** whered it go, wait, is it over there, no, what the ****, oh there it is, good tool, dont you ever run away again, 5 mins. later, what the ****, where in the hell is that wrench? 1/2 wrench, come back to me

 

[Doc Sprocket]

You really need to get organized!!! That would drive me insane! Clean workbench, containers for parts, ziploc baggies and a sharpie marker for fasteners and small parts...

 

[kendelrk]

its not that its un organized, its all in the toolboxes, its all there, its just i dont know the drawers for thesse tool boxes. and usually i loose them from running back and forth for things

 

[fowler]

i hate it when u drop a rag on a bolt then kill your self looking

out of intrest how much si a game of paintball in the us

iv been 3 times

it costs about $120 for gear hire and entry
then i used about 300 paint balls and that sets me back $150

iv only been 3 times and spent about $810

but would i go again
hell yeah it is soo much fun

 

[scooterman675]

we go to wasaga and you can get some pretty good deals there, buy 2000 paint balls get free Co2. but you have a 80 oz tank so your basically set for a good while, no matter how much of a trigger finger you are

 

[kendelrk]

well i cant find the stock linkage, because im terrible t keeping important things, and i absolutley dont want to take the governor out, i have taken better pictures so maybe you guys can help me figure out somthing,the last 3 pictures are of the bike itself,and the 4, show the governor arm, the throttle on the carb, and all the springs attached, i know theyre still terrible quailty, but thanks for all the help,

 

[kendelrk]

well there all out of configuration, the first, second, sixth and 7th are of the linkage, and 3-5 is of the bike itself

 

[Doc Sprocket]

You have two choices. Put at all back to stock, and I do mean ALL, our tear out the governor completely. Period. There is not bubblegumming, duct-taping, jury-rigging, or McGyvering this thing. The governor will not function correctly if there's parts of the assembly missing or incorrectly connected, so you might just as well rip it out. If you do not rip it out, there's a chance that either one if the internals will let go causing catastrophic engine damage, or the arm could swivel over and hit the crank, also causing catastrophic engine damage.

Since the governor can no longer control the carb properly, it's existence is dead pointless. Either source the correct parts or remove it like a tumour.

 

[kendelrk]

ive found, the throttle plate, and the governor arm, which was great for me, now theres only one problem remaining, i cant find the 2 bolts for the throttle plate, or the spacers, for the throttle arm

 

[kendelrk]

well found a way and got everything back to stock , used some diffrent bolts, and spacers, but stock, it appears that it holds the engine at half throttle, to keep as idle, and then full when you pull the throttle arm back

 

[Doc Sprocket]

it holds the engine at half throttle, to keep as idle,

I have absolutely no idea what you mean. Half throttle is not idle.

Now, did you follow the instructions in the service manual to properly set the governor up?

 

[kendelrk]

i did, but the stock configuration of the linkage keeps the governor at half throttle

 

[Doc Sprocket]

You mean the carb. The governor is inside the engine block.

 

[kendelrk]

exactley. a little mixed up, the carb throttle, is set to half, with the stock configuration, and when you pull the throttle arm, it goes to full

 

[Doc Sprocket]

If you have everything connected and set up correctly, go ahead and try to start it. Or have you?

 

[kendelrk]

i have not, mom called me in, wont let me outside till tommarow, so im going to try tommarow after school, did i mention how much i ****ing hate school?

 

[Doc Sprocket]

Enjoy it. Work sucks worse.

 

[kendelrk]

not if you love your job,

 

[devino246]

i have not, mom called me in, wont let me outside till tommarow, so im going to try tommarow after school, did i mention how much i ****ing hate school?

Just wait till you hit high school...