Jackshaft01
New member
- Messages
- 8
- Reaction score
- 7
Alright boys need some advice again…
Same 301cc runs great, kinda. If I push the throttle like a normal person it runs fine. If I stomp the throttle it bogs and dies (from idle). I’m thinking pilot/low rpm jet. I’ve tried switching main jet to larger size but has a negative affect(bogging/dieing). Second hand motor so not sure what if anything has been done to idle jet. Any thoughts? Do people usually replace or drill the low rpm/idle jet out. Emulsion tube to small?
Motor 301cc
Mods. Gov. Delete, oil sensor delete, Aluminum flywheel, header pipe, carb stage one pod filter and possibly main jet upgrade.
Not sure about main jet previous owner installed it. I did try a .42 and .43 and it ran like crap so put the original back in.
Same 301cc runs great, kinda. If I push the throttle like a normal person it runs fine. If I stomp the throttle it bogs and dies (from idle). I’m thinking pilot/low rpm jet. I’ve tried switching main jet to larger size but has a negative affect(bogging/dieing). Second hand motor so not sure what if anything has been done to idle jet. Any thoughts? Do people usually replace or drill the low rpm/idle jet out. Emulsion tube to small?
Motor 301cc
Mods. Gov. Delete, oil sensor delete, Aluminum flywheel, header pipe, carb stage one pod filter and possibly main jet upgrade.
Not sure about main jet previous owner installed it. I did try a .42 and .43 and it ran like crap so put the original back in.
