Reading belt sizes

Status
Not open for further replies.

phenom2955

New member
Messages
4
Reaction score
0
Hello,

I am trying to order a new belt for my brother online since we can't find a local shop that has them.

We have one go kart belt that is a little too short, but perfect width. The belt reads these numbers:

1422v290

Hes got another random belt off of a lawn mower or something that is the perfect length, but isnt the right type of belt and too skinny. The numbers on it read:

31013 15310

I am trying to judge the size of belt I need to order based on this information alone, but I have no idea what the numbers mean.

can somebody help me sort it out?
 

phenom2955

New member
Messages
4
Reaction score
0
Ok thanks, so the "Driven Outer diameter" is the "width" of space where the belt rests inside the pulley/clutch?

---------- Post added at 10:25 PM ---------- Previous post was at 10:00 PM ----------

Ok I am getting 9 1/2 by 3/4inch thick.

Its looking like the best match is going to be this:

203584A
BELT 203584A
9 5/8 to 9 11/16
8 3/4 to 8 13/16
33.18
24.50

Would that one work? Looks to be just a slight bit longer though?
 

landuse

Moderator
Staff member
Messages
18,803
Reaction score
612
Location
Pietermaritzburg, South Africa
Ok thanks, so the "Driven Outer diameter" is the "width" of space where the belt rests inside the pulley/clutch?



Ummmm.....no. The diameter is the diameter. Measure the diameter of the clutch from edge to edge. Like you would do for the diameter of a wheel
 

Attachments

  • 419wrkaZxCL._SX355_.jpg
    419wrkaZxCL._SX355_.jpg
    27.7 KB · Views: 0
Status
Not open for further replies.
Top