raptor throttle kit for fun power briggs?

Status
Not open for further replies.

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
They're the same basic kit made by 2 different companies.
Either kit should work as long as your carb/air cleaner is like this:

 

tundrabeagle3

New member
Messages
448
Reaction score
2
Location
Ca
yea that looks like my carb thanks i got confused cuz the guy that worked at rieken racing said it wouldn't fit but maybe he just wanted me to get the expensive one lol thanks
 

tundrabeagle3

New member
Messages
448
Reaction score
2
Location
Ca
i got the raptor throttle kit today. it did not fit perfectly because the arm with the spring on it was about an inch away from the throttle. but put a wire in between and it seems to work good. I was wondering if its possible to adjust the butterfly valve in the carb to open full throttle with less throttle pull.
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
Nope, you'd need to figure out a way to conect your throttle cable closer to the arms pivot point.
Or a on a go kart, you could possibly conect the throttle cable higher on the pedal to increase the pull ratio.
 
Status
Not open for further replies.
Top