radiator decodeing?

Status
Not open for further replies.

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
picked up a radiator from a wreakers today

it mounts on pins in rubber mounts
i need the rubber mounts

the bloke thinks it is from an EK holden (he was a holden scrapper)
holden is an aussie company owned by GM
the EK was built from 1961/62

i highly dout it is a EK as it is a plastic ally mix

it has PA66-GF30 stamped in it

the only info i can get is from other forums in my search
all they managed to gather is it has toyota in it :mad2:

it is a small radiator
it must be an older car or attract bad drivers :roflol:
as it is very common in all the wreakers in my area
thats why i used it :idea2:
 

r97

Measure twice cut once
Messages
3,793
Reaction score
9
Location
Massachusetts, USA
I can't find the part # for you, but could you not just measure it and buy the correct sized bushings/grommets?
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Ok first what is this for, Ie.. what do you intend to do with this rad.

secondly...
What is written "PA66-GF30", just means the plastic bits it is written on is a 30% glass filled poly amid 6-6 (ie. a type of glass reinforced nylon at 30%)
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
the radiator will cool a suzuki gsxr600 bike engine

bugger about the numbers
so there is no real way of knowing what it is from
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
ok this nis it compared to a suzuki swift radiator

it fits a 14in thermo like it was made for it

looks like it is from 2001
 

Attachments

  • 1.jpg
    1.jpg
    97.8 KB · Views: 4
  • 6.jpg
    6.jpg
    223.2 KB · Views: 7
  • 2.jpg
    2.jpg
    215.5 KB · Views: 3
  • photo.jpg
    photo.jpg
    214 KB · Views: 4

Rustydog2010

NZ Nutta :|
Messages
945
Reaction score
2
Location
New Zealand
Hey fowler are you going to be running an oil cooler? What about running a Honda civic radiator, with a oil cooler for the trans in the bottom? I saw one here for about $150.
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
ayyyy

after getting really bored
i just seached all car manufatures begining with H (the bloke was a H wreaker ????)
Holden Honda Hyundi and so on
so after going though all there models and matching the picture to the real thing iv come up with it being a Honda Del Sol never heard of them but it looks like im takeing a trip to the honda dealer to get them to narrow it down

the rad was casted after the cars years and mine is a duel core
but i imageine honda has used the dimensions in other ealyer models and upgraded the radiator

oh well at least the rad is off a honda
not a 50year old car that only 4 guys on here know about


EDIT rusty where are u seeing cheap civic rads and what model
all the models of the radiator sites were normal car size
 

Attachments

  • honda pos rad.jpg
    honda pos rad.jpg
    29.7 KB · Views: 5
  • logo_1993_honda_del_sol.gif
    logo_1993_honda_del_sol.gif
    6.5 KB · Views: 30

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
Im curious, not trying to be controversial, What is the problem. Does the rad work( not leaking or other problems) or is there other parts you are needing, requiring the make and model of the parent vehicle of this rad to finish this step?
 
Status
Not open for further replies.
Top