Bigredford
New member
- Messages
- 8
- Reaction score
- 0
Hey guys. New to the forum and had some questions about a Briggs 5hp I recently picked up for cheap for the go-kart I just picked up for cheap
It came with no tins so I'm not really sure its a 5hp, might be a 3.5 Its identical to a 5HP funtime briggs I have thats got a busted block on another kart I have Is there any other way to tell what this thing is without the tins? So if I have to rebuild I know what to buy.
I don't have the engine running yet guy I got it off of said he had timing issues with the camshaft. Took the back cover off and lined up the dots on the crank and Cam and replaced a sheared Crank key. I have had to spin it by hand because the tins from the funtime engine are missing the pull starter. I am in the process of getting a new one. It spins way too easily and seems to have no compression and its "burping" through the carb. You can put your hand over the carb and feel it blowing air pretty easy. Suspect that the valve might be leaking around the seat or possibly be bent but haven't done a leakdown test yet. Something has been bouncing around as there is some damage to the top of the piston and to the head itself but it didn't seem to damage the valves any. I tried swapping the head with the one off the funtime engine but still same issue. Anyone have any ideas about the burping through the carb? Thanks in advance guys!
It came with no tins so I'm not really sure its a 5hp, might be a 3.5 Its identical to a 5HP funtime briggs I have thats got a busted block on another kart I have Is there any other way to tell what this thing is without the tins? So if I have to rebuild I know what to buy.
I don't have the engine running yet guy I got it off of said he had timing issues with the camshaft. Took the back cover off and lined up the dots on the crank and Cam and replaced a sheared Crank key. I have had to spin it by hand because the tins from the funtime engine are missing the pull starter. I am in the process of getting a new one. It spins way too easily and seems to have no compression and its "burping" through the carb. You can put your hand over the carb and feel it blowing air pretty easy. Suspect that the valve might be leaking around the seat or possibly be bent but haven't done a leakdown test yet. Something has been bouncing around as there is some damage to the top of the piston and to the head itself but it didn't seem to damage the valves any. I tried swapping the head with the one off the funtime engine but still same issue. Anyone have any ideas about the burping through the carb? Thanks in advance guys!