Question: Tubes For 10X4.60-5 Tire Slicks

Status
Not open for further replies.
W

wilcoxaj

New member
Messages
11
Reaction score
0
I bought an old electric go kart from a family fun center that closed down. I'm currently in the process of stripping out all the electrical components and putting an 8hp B&S engine on it with a CVT. It's in pretty rough shape and this is my first real mechanical project. N00b alert.

Anyway, two of the tires were flat, so I got into them and one didn't have a tube and another had one but it was ripped. So, I've got to buy a couple tubes for these.

The sides of the tires have the size written on them: 10x4.60-5. I've done some google searching and can't find anything. My questions are: 1. What size of innertubes do I need to put in that size of tires? 2. Did I just inherit a weird tire size? 3. What is the cheapest place to buy them?

Thanks so much in advance for your time! I'm excited to get this go kart rolling!

AJ
 
W

wilcoxaj

New member
Messages
11
Reaction score
0
Thanks! I found the stickied post and I'm checking all those sites for my parts. I also checked Ace Hardware and found this tube:

http://www.acehardware.com/product/...re+tube&origkw=tire+tube&searchId=57747996393

Fits 10" dia. inflatable tires
Size: 4.10/3.50 x 4"
For 4" rim
L shaped stem valve

I'm wondering, how compatible is a 4.1/3.50 x 4" 10" tube with a 10x4.60-5 tube? The different notations are confusing the crap out of me.
 
W

wilcoxaj

New member
Messages
11
Reaction score
0
Sounds great. I'll call the tire shops and offroad shops around here and see if I can find it. Must be a crazy size.
 
Status
Not open for further replies.
Top