Pw80

Status
Not open for further replies.

Mr. Spindle

Senior Member
Messages
532
Reaction score
3
Location
middle tn
I opened it up and didn't see anything
I changed the oil, let's see what happens.

---------- Post added at 03:08 PM ---------- Previous post was at 03:06 PM ----------

Well, that ended fast. The Kickstarter is screwed up. :mad2:
 

ezcome-ezgo

G'me sumthin to write on
Messages
4,780
Reaction score
1,360
Location
Atlanta, GA
Oh I don't know, pull the piston, replace the rings and pin, replace the piston. Ta-da, rebuilt.

Or, pull the piston, remove the rings and pin, melt the piston down, chemically separate the alloys, sinter the alloys, smelt the alloys, cast a new piston, replace the rings and pinion, replace the piston. Ta-da? Sounds like a solid afternoon's work.
 

MTNSleder

😈 Snake ƘƖԼԼЄ&
Messages
988
Reaction score
0
Location
USA/CANADA
Oh I don't know, pull the piston, replace the rings and pin, replace the piston. Ta-da, rebuilt.

Or, pull the piston, remove the rings and pin, melt the piston down, chemically separate the alloys, sinter the alloys, smelt the alloys, cast a new piston, replace the rings and pinion, replace the piston. Ta-da? Sounds like a solid afternoon's work.

i'm going with number two :thumbsup:
 
Status
Not open for further replies.
Top