Pushrod length

Status
Not open for further replies.

matiask1

New member
Messages
38
Reaction score
0
Location
Santiago,chile
Hello:welcome2:
Noob here building an engine
So how can I determine the pushrod length I need I have a
Racing cam 285 lift 250 duration .0.38 head gasket 18cc honda head milled.050 with billet lifters and 1:1 rocker arms so can I use stock length pushrods and what is lash ajustment ?? Thanks:thumbsup::wai:
 

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,866
Location
Chicago-town USA
Lash should be around 0.003" or 0.004".
They sell an adjustable pushrod to figure out what length it needs to be. I saw one for $33.

Then they sell cut to length pushrods for $12.
 

Flyinhillbilly

The great cornholio
Messages
2,468
Reaction score
132
Location
North West Arkansas
It depends on the cam. Valve train geometry increases engine efficiency when it's right and decreases it when it's not. That's why there are different lengths, you have to find what works for YOUR setup, it's different on every engine.


PS: this is why I keep posting links, it's better to understand what you're doing than to just do it because someone said so.
 
Last edited:
Status
Not open for further replies.
Top