Pull start: another thing to look out for....

Status
Not open for further replies.

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
I have a twenty year old commercial lawn mower that I scored brand new back in the day. One of the reasons I scored it was the fact that it got spec'ed out from the factory with a pull start only gas engine.

Seeing as it's a 14 HP Kohler Command industrial model, you could say it's not your average 18~20 inch push mower.

Go to restart it Saturday after my Dad stopped by to check up on his soybean's, and come away with ~1/2 of the rope w/ handle. Look at the time, go to town for parts and a couple of other errands. Fix it in the morning.

Photo #1 shows the engine with the pull start removed; photo #2 show's what I found looking at the steel ferrule that the rope threads through. It's worn away to the point that it's about to become a knife blade.

With a bit of luck, it should get me through the season. But if you are suddenly eating rope's like they are going out of style, here's something to look for as a problem.
 

Attachments

  • photo 1.jpg
    photo 1.jpg
    140.2 KB · Views: 22
  • photo 2.jpg
    photo 2.jpg
    119.1 KB · Views: 23

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
..water can hollow a stone...

But thanks for sharing, it's indeed something to look after in case you buy a new rope every other month.

I hope you filed out the burr before reinstalling the rope ;)

'sid
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
..water can hollow a stone...

But thanks for sharing, it's indeed something to look after in case you buy a new rope every other month.

I hope you filed out the burr before reinstalling the rope ;)

'sid

Alex, the tool I need to deal with the burr is at work,and now that I know about the issue, I can monitor it. Cash is a bit tight for the next month or so: I shouldn't have a problem till then. Then I'm replacing the entire starter assembly.

If you look closely at photo #2, you can see that the plastic rope pully is crystallizing badly. And I can't believe I'm saying this, but its true: the legislation that required all plastics to be clearly labeled as to material was fully implemented like a year or so after I bought this previous year's left over model.......

I really don't know just how many year's longer I'll own this thing: and its not because its falling apart. Its because this type of mower requires the kind of body language to run that's easy when you're 26. 46? I'm getting to old for this :censored:
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
Could file down that sharp edge then put some sort of rubber spray coating or possibly rubber silicone on it. Might melt under the heat but just a thought

Nah, this is a 14 HP engine. The old rope was ~4 year's old, so it was also suspect. This unit should get me through the end of the season, then I'll swap for a new one. It's just showing its age.

Kind of begs the question though.... just how many time's have I pull started this thing?????
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Can you post a pic of the whole mower? Isthis one of those you stand on the back and it is self propelled?
 

machinist@large

Active member
Messages
2,865
Reaction score
34
Location
West Michigan, 49331
Can you post a pic of the whole mower? Isthis one of those you stand on the back and it is self propelled?

Yeah, it's a walk behind commercial mower with an aftermarket jungle wheel kit for the operator to ride/stand on. You steer it using the hand operated clutch/brake controls on the handlebars. This one's a 48" machine.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
Yeah, it's a walk behind commercial mower with an aftermarket jungle wheel kit for the operator to ride/stand on. You steer it using the hand operated clutch/brake controls on the handlebars. This one's a 48" machine.
Then I agree. Better if your 26, than 46.:ack2:
 
Status
Not open for further replies.
Top