Project go kart/ utv

[remartin18]

Hi All. I recently bought a used utv/go kart that needs work. For one it needs the wiring fixed because it got caught in the chain. So, I will need to get a wiring schematic. Here is the best part......It only has a serial number. No model or make or anything. Maybe someone here can recognize the SN and can tell me who is the Make. From there I might be able to search the web. Here is the SN and a pic of the kart.

 

[Denny]

I got no idea who built it, partly looks home built.

 

[remartin18]

I got no idea who built it, partly looks home built.

Hi Denny, It does have sheet metal on it but the guts are factory. It has 2 gas tanks and fwd and rev.

 

[remartin18]

I sure wish someone would help me with this go kart. I want it for my grandkids. I need to know what make and model so i can get a wiring diagram and parts.

 

[panchothedog]

Sorry you are not getting any help with your wiring problem. Your picture of the side of the kart doesn't really help much. Your statement that it is factory made and that it fwd and rev tells me it is a modern Chinese built kart. You should look for a shop that repairs these vehicles. Not plentiful but they do exist.

 

[Master Hack]

So a wire harness got cut or broken? without a pic or detail of some sort difficult to say.
i picture this:
unwrap the bundle on both ends, get some butt connectors and crimper, connect the blue wire to the blue wire, red to red, green to green and repeat as necessary.
re wrap the bundle and go.
more to it than that?