Predator oil drain extension.

Status
Not open for further replies.

Slimmpd

New member
Messages
82
Reaction score
0
Location
Calera Alabama
Anyone know of a supplier for metric M10-1.25 fine adapters.
I need to fab up an extended oil drain for Honda and Chonda gx200 or Predator 212 engines.
It would be nice to be able to go from the metric fitting to an NPT threaded pipe or tube.
If not an adapter, then a source of 10mm hard, tubing or pipe. I've found a die but only have been able to find flexible tubing in the size I need.
On the Murray karts I have the engine deck is pretty big and when I pull the plug to drain the oil it makes a pretty big mess.
Just looking for an easier way to get this done.
 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
Anyone know of a supplier for metric M10-1.25 fine adapters.
I need to fab up an extended oil drain for Honda and Chonda gx200 or Predator 212 engines.
It would be nice to be able to go from the metric fitting to an NPT threaded pipe or tube.
If not an adapter, then a source of 10mm hard, tubing or pipe. I've found a die but only have been able to find flexible tubing in the size I need.
On the Murray karts I have the engine deck is pretty big and when I pull the plug to drain the oil it makes a pretty big mess.
Just looking for an easier way to get this done.
When I look to do these things, true value hardware never lets me down. :D
 

dwcopple

backyard hooligan
Messages
192
Reaction score
2
Location
Mid-Michigan
I just did my 420cc predator myself. I used a M12x1.5 to 1/4NPT on mine. Drilled the openings out a hair and piped it off the side of my frame. Paid $10 for the fitting at the local hydraulics shop.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
I just did my 420cc predator myself. I used a M12x1.5 to 1/4NPT on mine. Drilled the openings out a hair and piped it off the side of my frame. Paid $10 for the fitting at the local hydraulics shop.

Wait a minute DW what do you have a 420 on?
:welcome2: back
 
Status
Not open for further replies.
Top