Hello. I have an old Murray two seater go kart with a predator hemi engine on it. Recently, I have been experiencing some troubles starting it up, as well as it dying frequently, even when it is warmed up. It will take many pulls to get it ready to run. It starts fine, but it struggles to idle, and dies out within the first ten seconds. I have changed out the oil with a synthetic Mobil, and I have lightly cleaned the carbeurator by taking the bowl off and squirting some carbeurator cleaner up into the area with the jet and the emulsion tube. Once the go kart gets running, it runs ok, although it is very clunky at mid throttle. Any suggestions as to what I should do? Thanks.