Predator 212 no spark after build?!?

Status
Not open for further replies.

SEA BASS

New member
Messages
7
Reaction score
0
Location
Grafton, WI
I built up a Predator 212 with all necessary items that you would throw at a 8000 RPM monster, including the ARC billet flywheel for the predator.....and now, no spark. I'll check the coil but was also wondering if removing the oil sensor would have anything to do with effecting the kill switch and causing a false alarm. Anyone have this happen before?
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
That would be my first place to look...it IS how the engine is disabled in a low oil situation. Most folks just bypass it and use the existing wiring to create a kill switch...
 

KartFab

Active member
Messages
3,381
Reaction score
60
Location
Dallas, TX
I would disconnect the wires going to the spark plug just to see, be prepared to pull the boot if it starts and revs like crazy.

The arc billet wheels have a stronger magnet in them, so they make a hotter spark. I am not saying this is the issue, but I have heard that some coils cant take the extra heat and fizzle out from overheating. That wouldnt make sense in this case as you never got it to start and run.
 

number9

New member
Messages
86
Reaction score
4
Location
KY
Hey man, the "brain fart" mistakes are *usually* free, though I've had some that cost me $$$ We all do it, glad you got it sorted out.

...
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
That's also why we like having pictures... Questions of .... Well theres yur problem(s).. Help out aswell..
 

Pantera6892

New member
Messages
8
Reaction score
0
Location
USA, Houston Tx
How do you like the 212 predator is it enough power...because I feel even though it's 212cc the 125cc on shifter karts is faster....any opinions
 
Status
Not open for further replies.
Top