TwoBigBalls
New member
- Messages
- 3
- Reaction score
- 0
Any tips for having a predator 212 mounted vertically (ohv up) and the carb flooding? It's leaking between the sandwich plate and the carb. Can easily plug it but curious how necessary that breather is. Also, it's flooding out through the jet. Bowl is about 80-90* mounted sideways, I believe the float is getting stuck and letting fuel just flow through the jet too freely. I do have a stage 1 kit with two jets and shaft, air filter and exhaust, however the jets and shaft have not been installed.
Does the float need to be adjusted in so it sits more closed/letting too much fuel in?
This is installed in a dirt bike and everything else is configured correctly so as soon as the motor can start it's good to roll.
Thanks guys.
Does the float need to be adjusted in so it sits more closed/letting too much fuel in?
This is installed in a dirt bike and everything else is configured correctly so as soon as the motor can start it's good to roll.
Thanks guys.