Predator 212 - Adapt Mikuni to Throttle Cable

Status
Not open for further replies.

gibbywmu

New member
Messages
85
Reaction score
2
Hi All,

Forgive me if I can't seem to locate this, but I'm not finding anywhere in here about how to adapt the mikuni carb to an existing throttle cable? I realize the current throttle mechanism goes out the window.......but I'm not sure how the cable is adapted from the pedal directly to the carb.

I see the Mikuni kit comes with the cable (made for a minibike), but I need to adapt to my current setup. Every video I've watched (Red Beards Garage and another) use the rod style pedal..........so they are just taking that cable that comes with the kit, and cutting off the barrel end on one side. I don't have the "rod" style throttle on my kart. Cable runs straight from the pedal to the throttle mechanism. Not sure if I can just reuse my existing cable, and then add that barrel to the end of it?

Doesn't look like the cable that comes with the kit is very long.....

I'm currently running w/ a Stage 1 Kit and governor removed.
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
What does the carb end of the cable look like?
Maybe just loop the throttle end and use a regular bicycle brake cable...
 

gibbywmu

New member
Messages
85
Reaction score
2
That’s a good idea too. I think the carb end of a bicycle cable could fit into the Mikuni carburetor, but someone else would have to verify. I’m not sure if the barrel would have to be ground down or modified to fit.
 
Status
Not open for further replies.
Top