Predator 212, 30 series TC on Baja warrior

Status
Not open for further replies.
A

aham2003

Member
Messages
219
Reaction score
1
Location
Cleveland, Tn
Has anyone added a TC to a baja warrior/heat bike? The TC plate, at the back of the plate, rubs against the engine mount frame rail. I tried raising the engine with 1 inch spacers, but then i cant get the gas cap off the tank due to the upper frame rail.

My question is, has anyone had this problem? Would if be ok to trim some off of the bottom of the plate? I would have room if I could grind down a little at the bottom side.

Thanks
 
bob58o

bob58o

SuckSqueezeBangBlow
Messages
9,646
Reaction score
1,851
Location
Chicago-town USA
Every time I mess with my kart I grind some of the TC plate away.
I'm sure it will be fine.
People even cut some of the "bosses" that support the shaft.
Remember this advice comes with ZERO liability on my part.
 
A

aham2003

Member
Messages
219
Reaction score
1
Location
Cleveland, Tn
After a bit of looking and pondering, I decided to grind it down and go with it. She works like a charm. My first experience with a TC, and I am very pleased!
 

Attachments

  • 20160716_203332.jpg
    20160716_203332.jpg
    601.5 KB · Views: 15
A

aham2003

Member
Messages
219
Reaction score
1
Location
Cleveland, Tn
landuse said:
Nice, but you posted the wrong side of the engine
Click to expand...

Well, seeing as I no longer needed advice on the TC and that it is obviously mounted and functional at this point, I just posted a picture of the final product that I took while I was out test riding.
 
landuse

landuse

Moderator
Staff member
Messages
18,772
Reaction score
555
Location
Pietermaritzburg, South Africa
aham2003 said:
Well, seeing as I no longer needed advice on the TC and that it is obviously mounted and functional at this point, I just posted a picture of the final product that I took while I was out test riding.
Click to expand...

This is a DIY forum, and it would be nice to see a pic of how you fixed your problem for the next person who has the same issue.
 
C

Ckolin725

New member
Messages
11
Reaction score
0
Location
Detroit, MI
aham2003 said:
After a bit of looking and pondering, I decided to grind it down and go with it. She works like a charm. My first experience with a TC, and I am very pleased!
Click to expand...
Do you know where I could get a pair of replacement forks for the Baja warrior like yours, black?
My bike was not part of the recall, and the forks were discontinued. I contacted the manufacture, and they told me they do not sell them anymore, only will pay for service to have them replaced. I was able to acquire a triple tree, but can not find the forks anywhere.
 
C

Ckolin725

New member
Messages
11
Reaction score
0
Location
Detroit, MI
I currently have suspension forks, but they are old and rusty. Rather than repairing, I would rather purchase a new pair; however, they are discontinued. I have a baja warrior mb200


Sent from my iPhone using Tapatalk
 
kevbo22

kevbo22

Member
Messages
347
Reaction score
0
Location
Colorado
bob58o said:
I want to add suspension forks to my mini bike too. I'm not sure what fits what.

http://www.ebay.com/itm/Front-Fork-...ION-Gold-/172033939619?_trksid=p2352135.l4275
http://www.ebay.com/itm/NEW-FRONT-F...-BIKE-47cc-49cc-2-STROKE-H-FK08-/380642721124

http://www.ebay.com/itm/PUMA-YUKON-TRAIL-MINI-BIKE-FRONT-FORKS-PAIR-USED-/122032838927
Click to expand...

2slicknick added these to his mini and said they worked great! Shoot him a pm.
http://www.ebay.com/itm/NEW-FRONT-F...49cc-2-STROKE-H-FK08-/380642721124?rmvSB=true
But his wasn't a baja
edit:
http://www.diygokarts.com/vb/showthread.php?t=26716&page=8 post#152
 
Status
Not open for further replies.
Top