Power Wheels Go Kart
- Thread starter Brheezy
- Start date
- Status
they're called A-arms, and judging by the size of the ones in the picture,
I'd say those are custom made parts, like the rest of the chassis.
(maybe just cut down.. IDK)
Many full suspension karts have similar pieces, many ATVs do as well;
so if you're looking for a similar size;
check for Kids ATVs (in the 50cc range) that way your chance of finding small ones like those grows
'sid
I'd say those are custom made parts, like the rest of the chassis.
(maybe just cut down.. IDK)
Many full suspension karts have similar pieces, many ATVs do as well;
so if you're looking for a similar size;
check for Kids ATVs (in the 50cc range) that way your chance of finding small ones like those grows
'sid
ML-TOYS
New member
Heres the source of that http://www.diygokarts.com/vb/showthread.php?t=8338
Man I knew it looked familiar somehow..
I even remembered a bike trailer..
but I totally missed to check this very forum of ours
thanks for filling the gaps 'sid
bigair49
Member
You guys are quick! They are home made A arms. I used solid round stock drilled out to 7/16" used some brass shim stock and 3/8" bolt for the pivots.
They are home made A arms. I used solid round stock drilled out to 7/16" used some brass shim stock and 3/8" bolt for the pivots.Ryafor
New member
bigair49
Member
Cool I would love to check it out. There is a sketch of the frame with a few measurements and wheel base on page 4 at the bottom
ML-TOYS
New member
Man I knew it looked familiar somehow..
I even remembered a bike trailer..
but I totally missed to check this very forum of ours
'sid
I was checking modifiedpowerwheels site and here, was'nt positive where it was but i did know it was on one of them.
Some days i have the memory of an elephant other days like dory from finding........what was i saying ?
chancer
ɔ ɥ ɐ u ɔ ǝ ɹ
P Sherman
42 Wallaby Way
Sydney
42 Wallaby Way
Sydney
Ryafor
New member
Can't wait for finding Dory
ML-TOYS
New member
- Status