Post pics of your GX380 GX270 Predator 389cc and 420cc exhaust!

Status
Not open for further replies.

dwcopple

backyard hooligan
Messages
192
Reaction score
1
Location
Mid-Michigan
I just mounted a 420cc Predator in my tractor. The exhaust needs to be moved for me to use my OEM sheet metal. The dang Predator is not NPT threaded in the exhaust port...argh. I will need to weld up something. If anyone has a spare stock manifold pipe lying around, PM me. I want it. Let's see what you guys did!!!
 

bob58o

SuckSqueezeBangBlow
Messages
8,748
Reaction score
848
Location
Chicago-town USA
Robertson Torque Tube H Loop from kartpipes.com via bullfrog motosports.
That link has some other cool pipes too.
 

Attachments

  • image.jpg
    image.jpg
    213.8 KB · Views: 8

mckutzy

Well-known member
Messages
8,353
Reaction score
31
Location
bc, canada
Ya big block have an actual manifold then separate exhaust muffler.
Maybe make a flange that fits the exhaust port using the manifold as a template... Weld a pipe fitting to accept pipe threads... And Carry on with how you want it...
 

dwcopple

backyard hooligan
Messages
192
Reaction score
1
Location
Mid-Michigan
Ya big block have an actual manifold then separate exhaust muffler.
Maybe make a flange that fits the exhaust port using the manifold as a template... Weld a pipe fitting to accept pipe threads... And Carry on with how you want it...

Yeah, I inquired robertson's above about a flange. I could just weld a coupler to that and use black pipe from there on out. Good freakin idea!
 

mckutzy

Well-known member
Messages
8,353
Reaction score
31
Location
bc, canada
If you really don't mind that look... Ya it's a simple one...
At least the pipe fittings are easier to weld than I'm guessing the manifold of mystery cast metal...(Ok the fittings are probably more mystery then anything... But hey, already have a bit of track reccord.)
 

dwcopple

backyard hooligan
Messages
192
Reaction score
1
Location
Mid-Michigan
this is one solution
 

Joe-405

Enjoying New Projects
Messages
2,673
Reaction score
69
Location
U.S.A.
I really liked the header that's $39.99 from Vegas karts ...................

I just cut the end at the bend and welded the tip back on to fit my application.
 

Attachments

  • IMG_20160622_190045582_HDR.jpg
    IMG_20160622_190045582_HDR.jpg
    300.5 KB · Views: 5
Status
Not open for further replies.
Top