pillow blocks

[KieranM]

does anyone know of a site that sells 16mm bore pillow blocks?
I have found flanged blocks with 16mm bore but there harder to work with.

Anyone have any ideas.

thanks

 

[imSRB]

http://cgi.ebay.com/CNC-Bushing-16m...emQQptZLH_DefaultDomain_0?hash=item20a88f2827

heres what I found on ebay.

 

[KieranM]

thanks but the ones i am looking for a like this.

http://www.3dcontentcentral.com/ShowModels/CONTENTCENTRAL%5CPILLOW%20BLOCK%20BEARING%5CPillow%20Block%20Bearing.jpg

I cant find them anywhere

 

[Kenny_McCormic]

Enlarge a 5/8" bearing by .004-.005". 5/8"=.625 16mm=.62992126 A 16mm reamer should do the trick.

 

[309antonios]

http://www.ebearings.com/wordpress/?page_id=4

 

[exit9teen88]

there's a place called tractor supply. they have a website to tractorsupply.com.
they have heavy duty sprockets, chains, pillow blocks and replacement bearings for them.

 

[freakboy]

there's a place called tractor supply. they have a website to tractorsupply.com.
they have heavy duty sprockets, chains, pillow blocks and replacement bearings for them.

they dont carry metric crap... well to my knowledge they dont.

 

[Kaptain Krunch]

Plus there way over priced, like $25 for a pillow block.

 

[r_chez_08]

This is the closest I could find http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=250562886032&sv=16mm bearing&emvcc=0
on Technobots there was someone asking a similar question and they said they couldn't stock them as they can't find a supplier. http://wap.ebay.co.uk/Pages/ViewItem.aspx?aid=190364568444&sv=16mm bearing&emvcc=0 you could use the bearing from this and put it in a pillow block. What I would do is get a 25mm or 1" pillow block, as they are common, and make an insert. You could weld the insert to the bearing

 

[Degerovita]

If you weld the insert to the bearing you'll more than likely trash the bearing