Oil Problem

Status
Not open for further replies.

lycsailor17

New member
Messages
27
Reaction score
1
I have a briggs and stratton engine, and according to the manual it says to only put in 6/8 of a quart. The last time I changed the oil I put in a whole quart. But that only fills like a third of the crankcase. I am guessing that It has that oil lubrication system that dips down and flings it on the bearings. But would filling the whole thing up be better?
 

devino246

Official DIYGK Chem Nerd
Messages
3,856
Reaction score
17
Location
Lynchburg, VA
The connecting rod has a little thing on it that flings oil on the internals. Filling the whole crankcase with oil would cause it to not run.
 

Russ2251

AZUSA:Powered by LAWN-BOY
Messages
6,622
Reaction score
47
Location
Huntington Station, Long Island, NY
Filling the whole crankcase with oil would cause it to not run.
Not correct.
But would filling the whole thing up be better?
No.
Over filling beyond manufacturers recommendation only results in a loss/waste of oil.
Oil will be forced out of breather and into carburetor creating a real mess of things.

But that only fills like a third of the crankcase.
How so? Do you have the wrong dip stick?
 

lycsailor17

New member
Messages
27
Reaction score
1
I have no dipstick, but in all of the pictures I've seen the motor has a dipstick. There it is a spot to put it in, but I don't have the dipstick. I was tempted to fill up the whole crank case, good thing I didn't. Thanks alot!!!!!
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
Well, 6/8ths of a quart is 24oz. Use the gauge on the window of the oil bottle to add 24oz.
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
I thought so as well, but he claims the manual says 6/8ths (why not 3/4ths, maybe a typo on his part) but 6/8ths of 1 quart is 24oz.
 
Status
Not open for further replies.
Top