Kart wrencher
New member
- Messages
- 7
- Reaction score
- 0
My son and I are stripping out a fan-cooled, electric start 540 engine from a Yamaha snowmobile. Our plan it to put it inside our FL250 Odyssey frame. So, here's the question:
The easiest option is to use the Odyssey clutch and chain drive mated to the snowmobile engine. then there are two trains of thought:
1. widen the Odyssey clutch to match the snowmobileto axle - cut on the clutch gearing
2. narrow the snowmobile engine clutch with a spacer to match the Odyssey clutch
Which makes the most sense?
We should be starting on this soon, so appreciate any advice.
Miike
The easiest option is to use the Odyssey clutch and chain drive mated to the snowmobile engine. then there are two trains of thought:
1. widen the Odyssey clutch to match the snowmobileto axle - cut on the clutch gearing
2. narrow the snowmobile engine clutch with a spacer to match the Odyssey clutch
Which makes the most sense?
We should be starting on this soon, so appreciate any advice.
Miike