Noob question on mounting engine

Status
Not open for further replies.

SabreT

New member
Messages
4
Reaction score
0
Hi All,

I'm new on this forum and building go karts so I need all the help I can get.

I'm looking to convert a quad bike into a go kart. I'm going to use the suspension, wheels, engine and other bits from the quad. I'm looking to safe space and mount the quad engine vertical and not horizontal like it's mounted on the quad. Will this be safe for the engine?? Not sure please help!!

Will post pics as soon as I start with the fabrication.

SabreT
 

anderkart

Moderator
Messages
6,432
Reaction score
392
Location
Surprise Arizona USA
Your issues would be lubrication and the carbs float bowl. I'd imagine they designed your engine assuming the quad would spend quite a bit of time at extreme angles climbing/descending mountains, so I'm guessing you'd be fine with the lubrication aspect.

But you might consider modding the intake manifold so your carb ended up sitting level, that way your carb wouldnt ever be at too extreme of an angle when you climbed hills in your kart.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I dunno- we're talking 60* or more incline from normal, and constantly. Personally, I would not recommend it.

Aside from what Anderkart mentioned, there's also the tranny and clutch (again, lube) to consider.
 

SabreT

New member
Messages
4
Reaction score
0
Thanks, I'll just stick to the way it were designed. the kart will be a bit longer but it that's no train smash.

Now to start fabrication, let the fun begins!!
 

SabreT

New member
Messages
4
Reaction score
0
How important is having front and back suspension. I'm thinking of keeping the independent front and single back suspension setup from the quad with the 145/70-6 wheels.

Another option is to only go with the independent front and no back suspension. This will allow me to mount the engine above the back wheels, and run the chain vertically.

Which one is the better setup? help please.
 

fowler

New member
Messages
5,463
Reaction score
18
Location
Bullsbrook West Aus
rear suspension

it will be a bit longer (clearly) but will handle much better and will be way more comfortable there by more useful
 
Status
Not open for further replies.
Top