Newbie port and polish

Status
Not open for further replies.

matman55

I dont have a camera!!
Messages
507
Reaction score
0
Location
Mims FL
I have a dremel, a 80cc 2 stroke engine,and the curiosity to port and polish the intake and exhaust manifold.can anyone give any tips on what to do and not to do?i have the basic understanding of what the purpose for porting and polishing is for i just want to get informed befor i go doing anything like that.
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I recently was also interested in this. Its not a good idea unless you know exactly what your doing. The best thing to do is just make sure your gaskets dont constrict the intake or exhaust hole.
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
It's not just about the manifolds, the main part is the ports in the engine; there's not much point doing one & not the other.

Having said that, as stated by Jake.B, it's not as simple as it looks; it's very delicate work, even more so on a small engine. Do a google & youtube search to get some insight before you pick up any tools
 
Status
Not open for further replies.
Top