Newbie here gx390 question

[kidn1980]

I am new to this site but looking for a go kart to build for my son I do have a Honda gx390 13 hp for power train. Now what size clutch and sprockets am I going to need. I have been looking at Affordable go karts website and they talk about mods on there but only up to 200 do they still apply to the honda390. Thanks ahead time

 

[mckutzy]

On the AGK website, midway down, 390 mods parts.

http://www.affordablegokarts.com/index.php


Clutch is for a 1" shaft, gearing wise, a tire size is needed to figure that. #40 chain is what it'll most likely come in(the clutch that is).

What's your budget?... Clutch or TC isn't going to be cheap.

 

[kidn1980]

Thanks for responding mckutzy,

On the ask website are you talking on left side or can you please post link

As for budget not really one but don't want to be pooring thousands just couple of 100 or if you could possibly post links that would be greatly appreciated

Do those mods still apply to the 390 that are on the agk website on the right

 

[mckutzy]

The links are self explanatory, parts to buy for your engine are on the left.

These are some things you can do as they are of the same engine "platform",
http://www.affordablegokarts.com/performance_basics.php

 

[OzFab]

As for budget not really one but don't want to be pooring thousands just couple of 100t

I can tell you now, even a basic clutch will set you back around $100

 

[kidn1980]

Ok go kart I'm picking up sunday....sooo I know im going to need a new 1inc clutch so where is best place to buy