*newbie* 9hp engine + torque converter

Status
Not open for further replies.

caskai

New member
Messages
3
Reaction score
0
Location
London, UK
hey guys. Im in London,UK and im planning to build the spidercarts reverse trike plan (scorpion) for my project later this year. So i just want to everything sorted out well in advance :D so for starter i was planning to put a 9hp honda GX270 engine on it but i was wondering if a normal comet TAV2 or max-torque torque converter would be able to hack it as some say they can only handle 6hp? plus what would be better comet TAV2 or max-torque.

any tip and advice for the whole build would be more than helpful as teachers think im in well over my head for this one but i think otherwise :thumbsup:

THANKS :cheers2:
 

caskai

New member
Messages
3
Reaction score
0
Location
London, UK
thanks for the reply guys :) hmm.. any suggestions instead of the scorpion? i just thort it looked pretty badass but if it falls over thats not so great
 

Jake.B

New member
Messages
495
Reaction score
0
Location
California-USA
I wanted to build the scorpion at one point too, it seems like it is not very great of a cart design. What if you did it like a trike instead? With a live axle in the rear, but still have a steering wheel even though it only has one front tire? I think that would be cool.
 

Doc Sprocket

*********
Messages
15,677
Reaction score
153
Location
Ontario, Canada
I wanted to build the scorpion at one point too, it seems like it is not very great of a cart design. What if you did it like a trike instead? With a live axle in the rear, but still have a steering wheel even though it only has one front tire? I think that would be cool.

Live axle and one front wheel? I think that would steer like an oceangoing freighter...
 

caskai

New member
Messages
3
Reaction score
0
Location
London, UK
I think toystory has a point jake haha. as arent reverse trikes meant to be the most stable out of the whole 3 wheeler family?
for instance, i hope you're not suggesting something along the lines of this: http://www.youtube.com/watch?v=QQh56geU0X8 haha
thanks for the suggestion tho
and metalthrash i was thinking about subaru engines but i have no idea where i would get one in the UK? honda engines seem easier to get hold of :)
any more suggests for ideas?
do you think if i had two wheels on the back axle would help aid stability?
thanks everyone :D
 

Bluethunder3320

New member
Messages
5,677
Reaction score
39
Live axle and one front wheel? I think that would steer like an oceangoing freighter...

agreed, this is what my kawasaki 3 wheeler did. a bald front tire thats 30 years old probably didnt help.

could you modify the plans to make it a 4 wheeler? just a longer back axle like T-man did?
 

spyder1968

New member
Messages
285
Reaction score
1
Location
New Bedford, MA
my guess would be that it would hold up if you had it geared correctly...but....imho you should go with the 40 series. it will definitly hold up and ....if you decide to up the power in the future, you wouldn't have to upgrade the T/C. i currently have a 40 series on an un governed 16hp with a tillotson carb and a header , pushing a heavy cart with 22" rear tires and it has held up well and takes a beatin !
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
You can get 13hp clones for around £200 on ebay, or get a 6.5hp clone for £100 and spend under £50 to get it to 9hp. or get a gx200 clone for £155.

Get a genuine honda if you can afford it, and same goes for the 40 series. IMO do not use a tav2 over 10hp. (btw geminikarts.com sell comet parts in the UK, but they are not cheap. shipping one over may be cheaper)

I would say the tarantula looks fairly good.
 

flowerman

junior member
Messages
211
Reaction score
0
Location
England, surrey
The scorpion is not their best design. I like the arnachid and the tarantula although the tarantula will be way Easyer to build though. Especially if you live in London gumtree is another great place for engines. Is this a gcse project? Subaru engines are great. My neighbour has a 6.5hp one in his kart.

Don't give up. I presume you can weld and have many workshop tools at your school.

Good luck
 

r_chez_08

Should be in the shop...
Messages
4,827
Reaction score
14
Location
Cornwall, UK
Don't give up. I presume you can weld and have many workshop tools at your school.

Good luck

Assuming they go to school :p
If it's a GCSE project, good going! But pretty sure you would have to design your own kart and fit it into the GCSE spec. So guessing it's not.

Also maybe check scrapyards etc for old Honda or Briggs or other power equipment.
 
Status
Not open for further replies.
Top