New to go karts, showing off our builds

Status
Not open for further replies.

Jarmo10

New member
Messages
8
Reaction score
0
Location
Baltimore
Hey everyone, new to go karting, but not new to racing. My buddy has been racing for a few years now and went to watch him earlier this spring with my brother and we caught the fever. The track we race on is about a 1/10th mile dirt oval, and its pretty much outlaw racing "run what you brung" with 3 classes, youth, 6.5 and under, and over 6.5. My brother bought a Manco rolling chassis for $100 from a guy at the track, we threw a predator on it and my bro ended up second in the youth class, and I won the big class. Needless to say, 3 days after our success I found another Manco chassis for $100. How could I be so lucky to find the same exact kart.

So I was a little behind with my new purchase. My brothers kart had outriggers as we call them, and also had the frame extended about 9" (we are both over 6') so I knew we had some work to do. First thing I did to my kart was take off the big balloon field tires, and mount some turf savers on 10" rims, and mounted smaller wheels on the front. Then we cut the frame in half and slid (2) 2' pieces of steel on the frame to make sure everything was solid.


Now Since my bros kart had won and was running like a top, his has been the R&D kart since the last races. Since we make such sharp turns on the track, we both had issues with sliding out of our seats and losing speed having to adjust ourselves coming out of the turn. So the R&D department had a great idea and creating almost a "wall" of padding to keep us in our seats.


The rear bumper was fabricated to protect the predator from being hit from behind, but after the second race, my brother spun out in a turn and took a nice hit to the front of the kart, preempting a bumper to protect the front. So now we have protection from both sides from wheels coming in (outriggers), and bumpers to protect all vital items to keep on racing. Below is the finished product of my brothers kart, which i intend to recreate on my kart. I guess you could say we have a racing team now and were building fast karts, that will also last the long haul of being abused on the track. Not to mention the awesome addition of the plexiglass number plate for the scorer (gets pretty dusty at the track.)


My kart is almost complete and if there is any interest I will post some more pics when mine is race ready. Still need to install the throttle cable and tighten everything up on mine, oh, and also get rid of the HF front wheels before raceday:D

Any thoughts or comments are welcome!

Edit: if pics dont load, i put an album of pics below (pics are in reverse order). Sorry!

http://imgur.com/a/5OSX4
 
Last edited:

XXXStevemanXXX

New member
Messages
60
Reaction score
5
Location
Astoria, Oregon
After running my China eBay TAV2 knock-off, I will NEVER run a kart without a torque converter. The amount of torque they put to the ground is astonishing. Its like you double the horsepower for free, and you get the 10% overdrive so you would be 10% faster then the other kart. You would eat his kart for breakfast adding one.
 

Poboy kartman

Senior Moments Member
Messages
12,461
Reaction score
73
Location
White Settlement Texas
Well.....either you are leaving something out.....or you and your brother have mad skill for what you are doing.....(and....coming from a family of racers....I tend to believe the later)....

You didn't mention any rules regarding modifications to the engine ????

Jeeze...if you can run a TC .....and are winning with clutches....get ya some....and you can pit for naps.....
 

Jarmo10

New member
Messages
8
Reaction score
0
Location
Baltimore
Well.....either you are leaving something out.....or you and your brother have mad skill for what you are doing.....(and....coming from a family of racers....I tend to believe the later)....

You didn't mention any rules regarding modifications to the engine ????

Jeeze...if you can run a TC .....and are winning with clutches....get ya some....and you can pit for naps.....

I have no reason to lie to a bunch of strangers. I guess I should have clarified. Our "races" are a bunch of rednecks who bring their backyard toys and race around a track. There's no limitation on wheel size, frame, etc... Its pretty much the honor system when it comes to the engine mods. No one takes it too serious and were all just out there to have fun. Here's a video of the heat race I won. like I said, I have raced flattrack dirtbikes my whole life, and this stuff kind of comes natural after that. Didn't mean to make it sound like we were in a championship series or anything.

https://www.youtube.com/watch?v=6uINaRssyxY
 
Status
Not open for further replies.
Top