Whitetrashrocker
Inmate #952016
No one listens to me.
New guy
- Thread starter Xander57
- Start date
- Status
No one listens to me.mckutzy
Well-known member
Xander- What he said....
taotao110d
SPP_MN
- Messages
- 49
- Reaction score
- 1
The kart will be more balanced with the engine in the middle instead of being on one side.
What size wheels and tires are on the front and rear of that kart?
Do they have hubs? Or bearings in the front wheels and a keyway in the rear wheels?
What size wheels and tires are on the front and rear of that kart?
Do they have hubs? Or bearings in the front wheels and a keyway in the rear wheels?
Xander57
New member
4.10/3.5-5 both front and rear and it's keyed in the back, bearings in the front, thank u
Xander57
New member
Both front and back are same size. Front has bearing, and back is keyed
---------- Post added at 07:50 PM ---------- Previous post was at 07:43 PM ----------
The axle I have is keyed all the way, and I noticed it's running out, so I took everything out and going to straighten. Also the bearing's are shot, so we'll do everything, and move the motor to center as well. Just made a career out of it.
---------- Post added at 07:50 PM ---------- Previous post was at 07:43 PM ----------
The axle I have is keyed all the way, and I noticed it's running out, so I took everything out and going to straighten. Also the bearing's are shot, so we'll do everything, and move the motor to center as well. Just made a career out of it.
- Status