NEW 212cc Hiccups

Status
Not open for further replies.

mindymogul

Mistress of Destruction
Messages
420
Reaction score
22
Location
Land of Camo and Fireball
Alright so now I'm starting to get a lil' p!ssed with this ongoing issue. For the 3rd time I bought a 212cc from our favorite toy store, replaced the oil w/ RP 5w30, ran the break-in and STILL on the THIRD *CENSORED* engine it keeps cutting out on WOT at 0% choke, and will only run full bore at 30%-50% choke.So I wanna know what the BLEEP is going on.
Of course HFT customer support don't know crap. I've also blown out all the lines, clean the debris from the air cleaner, and even replaced the fuel filter and still... I give up.

Any suggestions?
 

Kelly Wood

The Mad Kartist
Messages
1,785
Reaction score
41
Location
Salt Lake City Utard
Perhaps you're just cursed?

Pop the bowl off, flathead screwdriver... pull the jet, (center thingy) look inside. One tiny ANYTHING will cause this.
 

number9

New member
Messages
86
Reaction score
4
Location
KY
Seems I've read guys saying that the fuel line is too small and needs replaced with a larger size to flow properly?? Also read that the fuel cap needs extra 1/8" holes drilled to allow better venting and prevent a vacuum.

...
 

Toycrusher

New member
Messages
168
Reaction score
0
Location
Deep Deep South Texas
What fuel tank are you using? I made my own fuel tank one time and the tank started coming apart from the inside and would plug my fuel system every 15 min or so
 

mindymogul

Mistress of Destruction
Messages
420
Reaction score
22
Location
Land of Camo and Fireball
Are you sure the fuel is fresh & free of contaminants?

Yep. I've used 87, 91, and 95 octane, replaced the jet, blew out all the lines w/ about 60psi or air, even brushed the ports all clean and everything, yet still it does this to me. My last guess is there's some mismanufacturing and somehow it's back-pressuring the fuel flow. I replaced the gaskets and even that didn't help.
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
Seems I've read guys saying that the fuel line is too small and needs replaced with a larger size to flow properly?? Also read that the fuel cap needs extra 1/8" holes drilled to allow better venting and prevent a vacuum.

...

No, you do not need to do any of these things for the engine to run properly
 
Status
Not open for further replies.
Top