Needed advice for more torque!!!!!!!

Status
Not open for further replies.

Stukonpsychmeds

New member
Messages
5
Reaction score
0
Location
New richmond ohio
Here is my overall issue 1 I'm a pretty hefty guy at 250lbs and I'm using a predator 212 motor no mods with a TC system now before I get told to go get a bigger motor I also want to say that my Lil kids also ride this cart so I don't want to increase nor lose its current top speed I feel comfortable for them at that speed and don't want them to get hurt cause everyone knows it's not if they wreck it's when they wreck 2 how to get more torque to do donuts and slide around they ride in about 3 or 4 acres of open field but want to get back in the woods and it's up and down and there is a creek to cross which is not deep at all plus I have some seriously big tires any suggestions
 

Stukonpsychmeds

New member
Messages
5
Reaction score
0
Location
New richmond ohio
Here is the kart I recently purchased I'd also find it interesting if anyone could tell me what brand this I art is
 

Attachments

  • 00x0x_3cYUSx7KgU8_600x450.jpg
    00x0x_3cYUSx7KgU8_600x450.jpg
    55.3 KB · Views: 7

itsid

Moderator
Staff member
Messages
11,563
Reaction score
261
Location
Ruhrpott [Germany]
well if you want more torque you'll need to sacrifice top speed I'm afraid

the simplest solution: increase the toothcount on the axle sprocket.

that'd lower the ratio and you'll be given more torque (but less speed)

That kart looks hefty and the wheels are huge.. so if I should guess a ratio
it'd be ~10:1 maybe even lower than that

Do us a favour and count all the sprockets that are on there (the one on the tc first, following the chain, down to the axle... I assume you'll have a jackshaft in between)
and let us know.

'sid

PS if you really don't want to sacrifice speed to increase torque.. a bigger engine is the only way.
both (the 212 and the 420) run at 3600-3800 rpms max unmodified..
so no difference in top speed with the same ratio (just more grunt on the 420)
Downside: you'll also need a bigger TC to deal with the additional power.
 
Status
Not open for further replies.
Top