need key for Predator 301cc 8hp engine

Status
Not open for further replies.

Hairless Hippy

New member
Messages
16
Reaction score
0
I am a noob but really enjoying all the help I am getting from everyone.. It really helps!!

I have an engine I got that I am selling which came with a centrifugal clutch that has a key built into the clutch (no key required).

selling engine separately from clutch but engine doesnt have a key and I think anyone wanting to buy it will want that key for the keyway.

I'm sure they will want to pay less for this so I was hoping you could help me find the right key and install so the engine is complete.

I don't know much about the numbers and sizes but I think these specs are important in getting the right one..

see attached pic.

can I just to go home depot, but a square rod with the correct diameter and just cut to fit length?

Thanks.
Pete
:cheers2:
 

Attachments

  • keywayspec.jpg
    keywayspec.jpg
    170.8 KB · Views: 4

Half-breeder

"Edit" button removed
Messages
1,686
Reaction score
9
Asfar as I know... the 301 uses a 1/4" key stock. As far as I know HD doesnt sell key stock. For a local buy... try a local mower servicer for a possible scrap piece ... or "maybe" a NAPA may have some.
 

Hairless Hippy

New member
Messages
16
Reaction score
0
awesome .. thanks guys for confirming the size... 1/4" stock it is.. 6 bucks on ebay for 12"

seems like a good deal.
 

chancer

ɔ ɥ ɐ u ɔ ǝ ɹ
Messages
9,358
Reaction score
97
Location
COMFORT, TEXAS
ebay? why. I get them at the local true value pre cut and everything less than a buck.
 

Hairless Hippy

New member
Messages
16
Reaction score
0
I stopped by local true value and got 12" of 1/4 stock for a couple bucks.. it fit pretty darn tight, but it fits. Thanks again.
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
I always file the key, or at least polish it up. If it can slide in, its good.
In a pinch, one can cut a piece of 1/4" plate, 1/4" wide, however long. File fit that and use that as a key.
 
Status
Not open for further replies.
Top