Swabbster
New member
- Messages
- 439
- Reaction score
- 0
i bought a old snowmobile today it is 396cc now adays classified as 400cc, it an old gp 396 i think for 67, so kinda old but for 40 bucks it was a great deal, it does have spark in both cylinders, but the wiring has been all bypassed, no kill switch or anything, and i plan to put it in my sabretooth buggy i will be building, i primed it with gas and it fired right up, it has 115 miles only! and has a **** ton of compression, oh ya and best of all electric start! with recoil backup, but i need to know what will need to come out and how to re wire it, that is ware you guys come in! i want to have a battery on board to run the electric start, and a kill switch, when i redo it i will be soldering and using heat shrink tubing,
EDIT: i would think all i would need is the 2 wires coming out of the engine for the points to the coils? that is all the wiring to the coils i can see? ill start out with this engine and keep an eye out for something big and powerful, but for know this eliminates the need of a clutch peddle and shiftier, just gas and brake
EDIT: i would think all i would need is the 2 wires coming out of the engine for the points to the coils? that is all the wiring to the coils i can see? ill start out with this engine and keep an eye out for something big and powerful, but for know this eliminates the need of a clutch peddle and shiftier, just gas and brake