need help with thunder wheels go kart

[mppittman89]

need help with funder wheels go kart

Hello im in search for a funder wheels drive wheel or a solution for fixing it? Its belt driven and a 5/8 live axle i believe. Not sure if i can buy a set of rear wheels that will fit it with all that plastic hub / belt drive dtuff. The tire size on it now is 4.10x3.50x6. Thank you

 

[OzFab]

A 5/8" axle? that seems a bit light...

Can you please post pics

 

[mppittman89]

Im having some trouble post pics from my Android. I cant get the pic small enough.

---------- Post added at 09:09 AM ---------- Previous post was at 08:33 AM ----------

It is a 5/8 axle tho.

---------- Post added at 09:15 AM ---------- Previous post was at 09:09 AM ----------

http:// mppittman89.58521@uploads.photobucket.com

 

[Poboy kartman]

Im having some trouble post pics from my Android. I cant get the pic small enough.

---------- Post added at 09:09 AM ---------- Previous post was at 08:33 AM ----------

It is a 5/8 axle tho.

---------- Post added at 09:15 AM ---------- Previous post was at 09:09 AM ----------

http:// mppittman89.58521@uploads.photobucket.com

Download 'Image Shrink Lite'.... I post with an android....

 

[mppittman89]

in search for help with funder wheel

Hello,Im looking for a wheel that would fit this. Its a 5/8 live axle drive wheel. The opposite wheel is a 4.10/3.50/6.

 

[Poboy kartman]

Starting new threads to ask the same question is frowned up on this forum.....

(And generally against accepted forum etiquette anywhere....)

Not going to get you any more or quicker answers, but may tick some people off that might have otherwise given you some help....

 

[mppittman89]

Ya i didn't like the setup of my first post bc i was having trouble posting pics. Soo not being a pro with thousands of posts i figured i would restart. Mt bad for making two post. I would delete one if i knew how to.

 

[Poboy kartman]

Ya i didn't like the setup of my first post bc i was having trouble posting pics. Soo not being a pro with thousands of posts i figured i would restart. Mt bad for making two post. I would delete one if i knew how to.

Posts you can delete....threads can only be deleted by a moderator....

Just giving you a heads up....we've had new members that continued to start new threads after being told not to....that's when it becomes a problem...

I'm sure a mod will either merge or delete the duplicate thread...

 

[mppittman89]

Ok thanks for the heads up.

 

[OzFab]

Threads merged, posts deleted, now

 

[Iron John]

I'd probably find a suitable wheel for a 1" axle and make a sleeve to bush the wheel down to 5/8".

 

[mppittman89]

Ya ive pretty much decided im going to have to convert it to bigger and better and get rid of the belt drive system .thanks foe the ideas tho.

 

[Iron John]

For future reference, McMaster-Carr has all sorts of toothed (timing) belts.

 

[mppittman89]

What's the easiest way/ formula to figure out what gear ratio i need as fsr as what size sprokets to use

 

[Poboy kartman]

Use the calculator Itsid developed...or just wait for responses...(which will take a little longer)....because we need all the info you can just plug in the calculator.....

 

[mppittman89]

Where can i find the calculator?

 

[OzFab]

Read this