need help first time fixing a go kart

Status
Not open for further replies.

gokartguy590

New member
Messages
2
Reaction score
0
i have a fox 5.0 go kart and i want to find a cheap engine for it.
what i was thinking of doing was putting a 450cc engine on it but i cant find one in my price range i was thinking of $100 to $300.
 

OzFab

Well-known member
Messages
15,615
Reaction score
67
Location
Warwick Qld, Australia
That's assuming you're in the USA & you're referring to an industrial engine...

Keep in mind that, for the above mentioned engine, you will also need a clutch, etc, which could set you back up to a further $300...
 

qtband

Well-known member
Messages
1,766
Reaction score
60
Location
St. Louis, MO
That's assuming you're in the USA & you're referring to an industrial engine...

Keep in mind that, for the above mentioned engine, you will also need a clutch, etc, which could set you back up to a further $300...

Plus, you will have to fabricate a new engine mount....
 

Holmeswilliam86

New member
Messages
31
Reaction score
0
Location
Eastern NC
I got the comet 40 series torque converter off of amazon for around 73 bucks. I have it on a 13hp Honda clone . I had to make a smaller spacer (about 3/16”) but I’m sure you’d be able to find a washer with a 1” hole at any good hardware store.
 
Status
Not open for further replies.
Top