Need Help Finding Proper Rear Brake Master Cylinder

[HoagieBear]

So I am almost finished with my restoration of a 2004 carter talon dune buggy, but it currently has no brakes and can't be test driven because of this. I am in need of a rear master cylinder and possibly a reservoir too that has a 12mm banjo bolt on it for the brake line. I'm not sure if the old brake caliper is any good, but in order for us to be able to mount a brake caliper on the axle, it has to be the exact same size and dimensions as the old one, hence why we are trying to reuse the old on with the difficult 12mm banjo bolt if anyone can help, please let me know. Thanks!

 

[Karttekk]

Do either of these help?


http://www.buggydepot.com/model/22/4/carter-bros-talon-dlx-gx-fx-brakes.html

https://www.carterbrothersparts.com/carter-brother-150-250-rear-brake-caliper.html

---------- Post added at 12:06 PM ---------- Previous post was at 12:00 PM ----------

Or this?

https://www.ebay.com/itm/Carter-bro...per-Talon-150-DLX-FX-GX-GSR-GSX-/252206106826

 

[HoagieBear]

So I actually need just the rear master cylinder w/a separate reservoir that looks like this. I also posted some pics of the brake caliper to show you there aren’t any on the internet just quite like it with the same mounting points because they aren’t made anymore.

My next question would be is there some sort of adapter I could put on the end of my brake line to make the 12mm brake line hookup fit on a 10mm master cylinder? If so, this makes my life a **** of a lot easier because I can find tons of 10mm banjo bolt master cylinders that look like mine.

 

[kevbo22]

Amazon has a ton of these. I am sure they are all pretty much the same, but you may want to get some measurements.

https://www.amazon.com/dp/B00V4NBVC...mh&pd_rd_r=4PD8RSAJ8ET8BKXDHC5W&pd_rd_w=zrYqv

As for the brake line adapter, they do make adapters, but you'll have to look around for your sizing, here is just an example

https://www.amazon.com/Magnum-Brake...rd_wg=U9VkG&psc=1&refRID=R5XGCYABRN2WTWWFESBS

 

[Karttekk]

GoPowerSports has something similar also. Not sure if it's a rear one though.

Thanks

http://www.gopowersports.com/master-cylinder-mid-xrs/