Mystery engine

Status
Not open for further replies.

Shycago

New member
Messages
6
Reaction score
0
Location
Illinois
Hello maybe someone can help I have a Briggs and Stratton engine from a generator and I have a old engine already in a kart that I have acquired I want to see if the Briggs would be a better choice or use the old tired one that is in the kart and just rebuild it . I don't know much about kart engines just need a little help on where I should put my performance parts into thanks again.
 

Attachments

  • IMG_5748.jpg
    IMG_5748.jpg
    279 KB · Views: 12
  • IMG_5750.jpg
    IMG_5750.jpg
    261.5 KB · Views: 16
  • IMG_5749.jpg
    IMG_5749.jpg
    290.3 KB · Views: 10
  • IMG_5751.jpg
    IMG_5751.jpg
    264.9 KB · Views: 11
  • IMG_5753.jpg
    IMG_5753.jpg
    252.4 KB · Views: 10

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
I would vote rebuild the tecumseh. There is a good chance it has a cast iron sleeve, and it has the correct shaft for a clutch. If you want more performance, you might want to look into a torque converter clutch setup, like a tav2. And I recommend getting an air cleaner!
 

Shycago

New member
Messages
6
Reaction score
0
Location
Illinois
Can you give me a website that may have parts to rebuild or
Performance parts for it . So that's a no on the Briggs and Stratton ?
Or should I just sell them and get a raptor and just build that one up
 

karl

Well-known member
Messages
2,449
Reaction score
719
Location
North east Ohio
Ebay or a small engine store? Aftermarket for these motors are slim to none. Factory parts are available, just do a google search. I am trying to say putting a torque converter will make your cart take off faster and have more top speed , and one can be had for cheap on ebay. If you want to make a performance motor, how fast to you want to spend?
 

Shycago

New member
Messages
6
Reaction score
0
Location
Illinois
Got it maybe I'll just clean it up a bunch , and sell the Briggs and
Stratton and get a raptor I see there are a lot of after market parts
For the raptor engine
 

tinamcjittles

ello m8
Messages
391
Reaction score
1
Location
Allovau
Got it maybe I'll just clean it up a bunch , and sell the Briggs and
Stratton and get a raptor I see there are a lot of after market parts
For the raptor engine

These things sell for nothing all the time, but no matter how much you dump into them the max you'll hit is probably around 40-55. Raptors are awesome engines but you don't seem very handy with engines, least from what you've said; may be wrong..
 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
Forget the raptor. Forget the Briggs.

There's more performance parts out there for the Rota-derp than you can shake a stick at.

I understand they're only making 2000 of them this year, and they're due to come out next week sometime.



Chancer is about the only other guy on here who knows where to get them.
There's a few others, but they don't want to be bothered to stand in line for people.
 

Shycago

New member
Messages
6
Reaction score
0
Location
Illinois
These things sell for nothing all the time, but no matter how much you dump into them the max you'll hit is probably around 40-55. Raptors are awesome engines but you don't seem very handy with engines, least from what you've said; may be wrong..

Boy I sure hope I do this rebuild ok 👌
 

Attachments

  • IMG_5781.jpg
    IMG_5781.jpg
    310.4 KB · Views: 7
  • IMG_5782.jpg
    IMG_5782.jpg
    335.7 KB · Views: 11
  • IMG_5787.jpg
    IMG_5787.jpg
    336.1 KB · Views: 9

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
wait why are they only making 2000 this year?
These are very special engines.

Here, let me paste some of the copy:

The finish on these are so impenetrable, that nary a scratch shows after 7 years of use.
It does not leak oil, and even comes without any governor installed.

The extra .3 cc's smears the competition all over the backyard, as well as the track.
With the simple twist of a screw, the output can be changed from a meager 2.5 hp, to a roaring 11 horses.
It will run on diesel, gasoline or alcohol efficiently with zero modifications.

After 9 years of continuous use, this engine shows zero decline in compression using a leak down test.
Using unique BITT (built-in torque technology) this engine is guaranteed to never burn up a clutch.

The spark plug alone comes with a ten year warranty, and with 11 years of use, the plug has never needed replacing.
All internal parts are composed of 100% depleted plutonium 236, including the modulator and flannigan rod.

No other competitor's claims can even come close to this 15 year old engine that has never once been torn down or rebuilt.

The Rota-Derp is the finest engine available on today's market, bar none.
At $93 dollars US, there is just no way you can go wrong.
 

Shycago

New member
Messages
6
Reaction score
0
Location
Illinois
Well a coworker had a predator for 100 bucks looks like a good deal
Brand new in the box
 

Attachments

  • IMG_5788.jpg
    IMG_5788.jpg
    280.8 KB · Views: 6

pRoFiT

Can't buy it?, build it!
Messages
1,151
Reaction score
64
Location
California
Well a coworker had a predator for 100 bucks looks like a good deal
Brand new in the box

That is the going price new from store. Probably the easiest buy you can make for a go kart. Sometimes they are $96 on sale.

Oh I zoomed into image. A 301cc Pred. Good deal. They are a little more. But I think you end up with 1" shaft.
 
Status
Not open for further replies.
Top