my other toy

Status
Not open for further replies.

South Kart3377

Kart designer
Messages
377
Reaction score
2
Location
Va
I have an old kart frame in my yard, I should I put this engine on it http://www.arcracing.com/servlet/the-510/Dupor-BSP-Honda-Clone/Detail I will order a high-p air filter, I have acess to 4 welders, a bench grinder, angle grinders, a lathe, a milling machine, a drill press, a dremel tool, more drills than i can count, 5 sawalls. I also have tires and a rear live axle setup with 56 tooth 219# sprocket. How should I do this???
 

DCProductions

Cockney Ragamuffin
Messages
496
Reaction score
0
Location
Louisiana, USA
Well if the kart frame has an engine mounting plate, you could just bolt it on. If not, you could buy an engine plate and weld it on, or make one yourself. Then you should go about assembling the drive-train.
 

birddog1148

New member
Messages
112
Reaction score
3
Location
Sandusky, oh
With that engine you will need an exhaust, air filter addapter, air filter, a fuel pump if you are using a remote fuel tank and a way to mount your linkage.
 

South Kart3377

Kart designer
Messages
377
Reaction score
2
Location
Va
With that engine you will need an exhaust, air filter addapter, air filter, a fuel pump if you are using a remote fuel tank and a way to mount your linkage.

I forgot to mention, for the exhaust I have a tubing bender. for the air filter adapter I have the milling machine, and the lathe.
I put the fuel tank on the back of the seat, and tubing straight to the carb. I will order the air filter.:auto::auto::wai::wai::2guns:
 

redsox985

Active member
Messages
4,092
Reaction score
12
Location
PA
You should be able to make the adapter entirely with the lathe. I've thought this out before. Cut a 1/2" or so slice off of 2" round aluminum. Drill your 2 mounting holes where they need to be. Then toss it in the lathe and center drill it just a hair larger than the bore of the carb. Do facing cuts on both sides and then start taking out the center of one side but leaving a rim. Making it look just like the ones sold on karting sites.
 
Status
Not open for further replies.
Top