My New Project any Suggestions?

[Denyingchaos]

Ok Well rain ruined my plans today so I got the pictures of the front end as requested. Hopefully they will help you all help me

 

[Poboy kartman]

Thanks for the pics....it appears to me to have been hit hard on the right side. .. (as you are driving it) left hand spindle looks correct. .....

From a side view. ...is that bumper twisted????? I'm thinking the axle and frame may also be slightly bent....hard to tell unless the pictures are 100% at 90°......so look closely. ....get it up off the ground. .... (like on sawhorses) and try to sight line everything. ...(like rifle sights).....

This will show bends and defects not readily apparent. .. (especially to the untrained eye. ....

Post back up any variances. ...(preferably with pics) ....because a straight spindle is still not going to work correctly on a bent axle. .....

 

[Denyingchaos]

The front bumper curves up but after taking a straight edge to it the frame is sound, but the right side seems to be pushed back almost but not quite an eighth of an inch. Now the axel bar is straight...seems the bracket is what was pushed back.after reading your post i was getting worried.

 

[Poboy kartman]

Ok....so check it this way.....butt a a tape measure to the back axle and measure to the pivot bolt center of the spindles on either side. ...that is probably what matters most. ......

 

[Denyingchaos]

Ok looks pretty good, other then my spindles being bent, and after taking them out to get measurements, i guess my eyes were playing tricks on me so nothing on the kart itself it actually bent....I also found that instead of using pins, they used full threaded bolts....smh...and one of the tie rods is bent....looks like even though the frame is good...its needing a front end...i will replace all..just have to find parts now...on a side note, we are at a cookout so i brought it with me for the kids to mess with, it starts and runs fine, but after a few passes it stalls out like its losing fuel....i have checked kill switches, fuel and everything in between and cant figure it out....itll fire right back up after it dies

 

[Poboy kartman]

One thing at a time. ....replace the spark plug. ... (not as silly as it sounds)..and I'll take mustard and relish on my hot dog.

 

[Denyingchaos]

Im a chili and slaw guy....myself but im an old redneck from West Virginia.
Im actually sending the old lady to the parts house now to get one...shhh dont tell her i said it....but anyways...looks like about 500 for everything...may toss a new honda on it...the more we ride the more issues i see...but atleast i know...again just gotta find parts.

Ps theres plenty of food....

 

[Poboy kartman]

Im a chili and slaw guy....myself but im an old redneck from West Virginia.
Im actually sending the old lady to the parts house now to get one...shhh dont tell her i said it....but anyways...looks like about 500 for everything...may toss a new honda on it...the more we ride the more issues i see...but atleast i know...again just gotta find parts.

Ps theres plenty of food....

Jeeze....I never slaw that coming.....that's just weird. ...I know Carolinians like coleslaw on their pulled pork sandwiches...I (think).....

Any way. ....are you talking slaw.... or kraut????? Kraut on a dog is natural. ....slaw is downright weird. .....

If you want a salad....get it on the side!!!!!

 

[RiverSideRun]

I'm from New Jersey and chili and slaw is classic on a dog

 

[Denyingchaos]

Ok ok....im from WV. Slaw and chilli was common from us....i spent about 7 years in NC and if asked for all the way on anything...i got chill and slaw on it...cheeseburgers included....now kraut it kraut...love it...not on my dogs or my brauts....but if your a grill guy and come to my house...all the way means chilli slaw abd onions...condoments are your own...but i did find out that every place in the world you go...if you wanna dog or a braut...ask them WTF. There all the way is...if not you will be surprised...



Now WHERE SO I GET PARTS LOL

 

[Denyingchaos]

Sorry but still at this shin dig....and gotta few in me...so my tying is a little more horribad then usuall

 

[firemanjim]

Sorry but still at this shin dig....and gotta few in me...so my tying is a little more horribad then usuall

post some more in an hour or 2.... This is funny.......

 

[Poboy kartman]

Heck yeah! !!!! Never seen anyone slur in posts.....keeper comin'.....!!!!!

 

[Denyingchaos]

Well atleast u knw now i m amusing someone. Thanks all

 

[zbuck]

Can you post the name on the rear bumper? I can not read it with the roll bar in the way. Down in the southern states if you order a pulled pork sandwhich, the waiter/waitress will usually ask you with or without (meaning slaw) and most Yankee's do not understand the question. So I will have mine with. Hot dog/brauts with chili and onions, I will eat the slaw on the side.

 

[landuse]

Can you post the name on the rear bumper? I can not read it with the roll bar in the way. Down in the southern states if you order a pulled pork sandwhich, the waiter/waitress will usually ask you with or without (meaning slaw) and most Yankee's do not understand the question. So I will have mine with. Hot dog/brauts with chili and onions, I will eat the slaw on the side.

I think it says US Eagle

 

[Denyingchaos]

It Says US Eagle I, I have searched for it with no luck I really need new spindals and tie rods....

 

[Denyingchaos]

Welp Good news and bad news. Seems back in the '90s my Kart was recalled. It also seems the manufacture who was Minat Inc. Went out of business. Good news is mine has the guard on it....Bad news is Im gonna play **** finding parts unless I pay crazy money for them on Fleabay....