my first project "rubbish"

[meedo]

that was helpful man thank you

 

[honda02]

No problem. Keep up the good work. Keep us posted with pictures too!

 

[meedo]

sure man as long as oi figure out how to bend two consecutive bends . for example if i have a u bend shape of outer to outer measure of 42 cm how can i mark the tube in order to have the required measure , cause every time i make it it varies sometimes the u shape is shorter and sometimes is longer . this is driving me crazy guys please hellllp

 

[meedo]

today i made the front steering mounts .

 

[meedo]

this is the pics of the steering rack mount no more pics as im having dilemma with the upper and lower a arms measurements. as in the previous pic the shocks were too tough making the lower a arm stretched down dramatically resulting in moving of the wheel to the sides scarily when putting a weight on

 

[meedo]

these are some pics after rejecting the front suspension but i think im gonna try harder if somebody could help me that would be awesome

 

[meedo]

im gonna go on the roll cage and the sides tomorrow , ive a problem guys my rear sprocket is 42T and the engine sprocket is 14T would that make it go fast with the Honda 160 gx 5hp engine

 

[dpaxson]

you'd go really fast if you had a parking lot 5 miles long. i would go for a 60 or 72 tooth on the back if you're using it off road

 

[Hendersonjk]

sweet looking frame! and I was thinking of using the tiller type tires too. are yours on back wards? you were having trouble with your bends using a level or an angle finder like ccrunch said really helps and it probably keeps changing because metal sretches funny some times I made a big "angle coppier" out of two peices of flat bar metal about a foot long and bolted it together to look like this thing kinda

 

[meedo]

today i postponed the roll cage and decided to ride it today it was amazing but takeoff was awful but it was very fast after that . i have to go for a bigger rear sprocket as 72t i think ??.

 

[meedo]

:toetap05::toetap05::toetap05:frooooont suspensiooooooooon heeelllllllllppppppppppppp???????

 

[meedo]

yes i just messed up putting them on the right sides. front suspension is driving me crazy

 

[theo]

Make a jig for your a arms this way the tubing can be off slightly but with the rod end locked in the jig and the hinge tube locked the a arms will turn out ok.

 

[Doc Sprocket]

Meedo- Looking good! I have a question and a concern... Question- Can you please explain the water pump clutch and how it works? I'm just not getting it.
Concern- I'm not sure bicycle chain and sprockets are strong enough!
Good luck, and keep up the good work! Cheers- Chris