XxbossdogxX
Member
- Messages
- 17
- Reaction score
- 1
Hello everyone, I've just finished modifying my predator 212cc and when i start the engine it idles at a ridiculously high rpm. When i pull the throttle cable it revs even higher (so the throttle isn't stuck or anything). I have a mikuni 22mm carburetor and I've adjusted, what i believe to be, the idle screw and had no change in idle rpms.
engine mods:
Black mamba camshaft
billet connecting rod
billet flywheel
22mm mikuni carb
autolight AR-3910x spark plug
26lb valve springs
*pic of the "idle screw" that i'm adjusting (please point out to me if this is not the idle screw)
Any help would be greatly appreciated, I want my go kart running ASAP.
Thanks!
P.S. - I searched google already and found no help
engine mods:
Black mamba camshaft
billet connecting rod
billet flywheel
22mm mikuni carb
autolight AR-3910x spark plug
26lb valve springs
*pic of the "idle screw" that i'm adjusting (please point out to me if this is not the idle screw)
Any help would be greatly appreciated, I want my go kart running ASAP.
Thanks!
P.S. - I searched google already and found no help