Misc. Parts for sale

[Kaptain Krunch]

I'm moving in a few weeks, figured i should try and get rid of some of my unused parts.

Heres a list of what i have, make an offer on any. If your interested i can get pics of anything.

- 3 mikuni VM38SS carbs all are gummed up and need a good cleaning (i dont have any carb cleaner left), they are all missing the choke plungers too.

- 428 pitch, 40mm bore 24t shifter kart sprocket, good shape.

- 3.5hp briggs, burns oil. Shipping would most likely be ALOT so i'll say this is a part out.

- Misc polaris engine parts, heads, jugs, CDI's, Coils, Radiators, etc. Again if you need anything like that let me know i might have it.

- Polaris secondary clutch, 1" keyed bore, 11" OD, inside width from the very outside of the sheaves is 1 1/4". Good shape.

 

[ddlyspdr]

how much for one of the mikuni fuel pump one of the 1in and 2 out??

 

[Kaptain Krunch]

how much for one of the mikuni fuel pump one of the 1in and 2 out??

Make me an offer. I also just realized that its 1 in 1 out and one for the pulse hose from crankcase...Not sure what i was thinking when i posted that haha. If your still interested let me know.

Heres a pic

 

[Rickracer]

Any idea what the carbs are off of? I've got a 450 cc twin on my Kawasaki mule that the carbs are really garbage. I HATE those Kawasaki vacuum diaphragm carbs, they have been a pain in my butt every since I got that thing, and I've been looking for some regular slide carbs to replace them with. If you could post some pics, they might be just what I need.

 

[Kaptain Krunch]

Well, they were from a polaris 750, triple cyl sled. We're in the process of moving, and all my parts are at the new house so i probably wont be able to get pictures for a while, Sorry. If your interested though, and willing to wait a week or so, let me know. Like it says in the first post, there not clean, and missing the choke plungers, so im not looking to get a whole lot for them.

 

[Rabbit_Fighter]

Kaptain,

Mate wondering if you got rid of all you mikuni vm38ss carbs. I'm chasing some parts from one. Mine has the accel pump and I'm chasing the plastic cam that activates it but will take it whole if you still have it

Thanks

Phillip

 

[oldskool]

Would your mikuni work on my briggs 8hp? If so I am interested. My stock updraft is giving me fits!

 

[Rickracer]

If they will work for me, I want two of them, still waiting for more info....:toetap05:

 

[Kaptain Krunch]

Rick, man im sorry i completely forgot, the house needed a bit more work than we thought, then i got into my latest project. Anyways heres some pictures, no great but its all i can get with my phone.
Its pretty hard to tell from the pic, but the ID of the small side of the carb (side that is attached to engine) is about 1.5" and the OD is just a bit bigger than that.

Heres the two better carbs side by side (the third carb isnt in as good condition and is missing 3 of the bowl screws).

Heres where the choke plunger should go, you will either need to get a new one or plug this hole with a bolt.

Inside of carb, its not really too dirty, but there is a little rust on the float bracket and whatnot, nothing major, although a good cleaning wouldnt be a bad idea.

Inside of bowl, again not horrible but should be cleaned up.

If you have any other questions/ or need more pics let me know, and again im sorry.


Rabbit and oldschool, if Rick doesnt take them i'll let you know. Just to make sure that you know, they do not have choke plungers which means you will either need to buy a new one (no idea where to get them), or plug up the hole with a bolt (meaning you will have no choke).

 

[Smurph]

Have any differentials? Let me know

 

[Kaptain Krunch]

Nope, sorry.

 

[KieranM]

Would you have a coil from an kioritz echo 451 VL chainsaw engine?

 

[Kaptain Krunch]

I have mostly lower end saws, but if you take a picture of the coil, i may be able to find something like it in my pile like it.

 

[KieranM]

http://www.diygokarts.com/vb/attachment.php?attachmentid=5158&stc=1&d=1254164062


http://www.diygokarts.com/vb/attachment.php?attachmentid=5157&stc=1&d=1254164062

This is what it looks like. There very hard to find nowadays, non on ebay, hope this helps.

 

[Kaptain Krunch]

I got some that are close, but different bolt pattern. sorry

 

[Rickracer]

How much for the carbs, shipped to 34744?

 

[Kaptain Krunch]

Shipping should be $10-$13 in a flat rate box, so just make me an offer on the carbs, i have no clue what the ask for them.

 

[neebles]

Hey, do you still have any of those fuel pumps?
I could offer 15 shipped for the one pictured above? (1 in 2 out)

 

[kazkepox]

ill take the other one for the same price

 

[Kaptain Krunch]

I only have 1 left, the 1 in 2 out is gone. The only one i have left is the 1 in 1 out. Pm your address so i can figure out shipping, i may need a bit more than 15 tho it depends on shipping costs.