Minimoto electric to gas conversion.

[Calvert]

4 holes 47mm or 1.85" apart.

 

[itsid]

don't measure hole to hole.. BHC are measured diagonally..

that's 63.6mm or 2 5/8" inches roughly.. is that correct?

Oh, and for additional precision, please measure the center of each hole, OR from the outer to the inner edge (which is the same distance)

chances are it's just the std 2 7/8" bhc as the ones I linked...

Or, on the very same page, there's a sprocket carrier with that bhc too
just in case there's no other option left

'sid

 

[jd10ac]

Hey guys I believe it was just the standard 2 7/8 sprocket that I opened the holes up to fit the smaller axle. It wasnt a perfect fit but it also wasnt bad. Sorry it took so long to reply.

 

[Calvert]

Thanks for the reply.
I guess I'll just buy a standard sprocket and see how it goes.