Mikuni carb tuning help needed (Please)

Status
Not open for further replies.

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
I just installed a brand new mikuni 22. It runs, but....

I'm in need of adjustments. All the instructions online are pretty vague. In the diagrams I can't even tell which screw is which.
There's the slotted knurled one in the middle, and then one brass one sitting about flush with the carb right next to the air intake/air filter. Nothing on bottom but a drain, just the two.
After my cruise this morning, this is what I noticed:

It took three pulls to start. (Tried Both choke on and choke off. I can't remember which position, but I'm thinking off.
When cruising along at a fair clip, and adding throttle, it does pretty well. Only seemed to kinda choke a stroke once or twice before taking off nicely.

When idling coasting downhill, the engine starts sounding like it gonna die, and did once.

It seems to idle a little high when standing up, but slows down and dies on the kick stand.

I appreciate your help guys. I won't be a noob forever!
 
Status
Not open for further replies.
Top