Mechanical tachometer

Status
Not open for further replies.

Jaeden de Boer

New member
Messages
37
Reaction score
0
I was wondering if there was any way to hook a mechanical tachometer up to a small engine. My engine is a gx240. The tach is from an old semi truck.
 

mckutzy

Well-known member
Messages
8,353
Reaction score
113
Location
bc, canada
let see the tach....

For the most part... it could be some how hooked up to the pto side of the motor, if a long nut or custom bolt was used to secure the cvt or clutch for the pickup cable....but really depends on the tach....
 

Kartorbust

Inmate #627
Messages
4,605
Reaction score
1,100
Location
Utica, NE
Just look at Jegs they should have one that will work. Otherwise most other tachs will wrap around the spark plug or plug wire.
 

Jaeden de Boer

New member
Messages
37
Reaction score
0
Thanks guys but I realized the tach only shows up to 3000 rpm because it is from a semi truck so it wouldn't even show the top rpm of my engine
 

Bbqjoe

Banned
Messages
3,455
Reaction score
70
Location
Location, Location
The ebay mini tachs work pretty well. They have a bit of a delay, but they're inexpensive, waterproof, and will get you into the ballpark.
 
Status
Not open for further replies.
Top