Maybe, someday.

[Jrgunn5150]

It's a start at least.

 

[FreeRunner15]

i want to get that so bad but i'd have to upgrade to 40series TAV, sell old engine stuff, save up again for live axle,buy forged rod $120, buy a non-rev-limiting coil $80,$50 torque camshaft, over $420

 

[ezcome-ezgo]

Or you could just be friggin' satisfied with it as is. ^^ this is juvenile.

 

[Jrgunn5150]

i want to get that so bad but i'd have to upgrade to 40series TAV, sell old engine stuff, save up again for live axle,buy forged rod $120, buy a non-rev-limiting coil $80,$50 torque camshaft, over $420

I have no go kart, so for a scratch build it will work great for me. I'm just going to pull the governor, put a header, filter, and jet kit in it and zooom on.

 

[Jrgunn5150]

I'm too excited for an engine I have literally no use for lol. I don't even own a go kart now.

 

[angus67]

Easy part os done. I could buy a airplane sitting at my pc. Time to get dirty and search scrap yards for frame tubing, or just sit there, go to bmi, and order a frame.
Got to start somewhere

 

[Jrgunn5150]

I have a bunch of square tube to get started.

My next step is to find my transmission. This won't likely be quick, I doubt I'll be driving it this year lol.

 

[FreeRunner15]

I have a bunch of square tube to get started.

My next step is to find my transmission. This won't likely be quick, I doubt I'll be driving it this year lol.

Even though you won't be driving it soon i would still keep up with all of your posts, pics, and Videos? its too bad it takes $200 to safely remove the rev limit (new coil, arc rod,). and up to $150 to raise the rev limit and give lots more torque(springs and cam).

They have a $50 cam and i think it was a $130 but i believe it's the same as comparing a black mamba to a black mamba jr; torque vs all around except with much more power than a 212 so it is most likely worth it.

i wonder how long these insanely good deals will last.

 

[Jrgunn5150]

Even though you won't be driving it soon i would still keep up with all of your posts, pics, and Videos? its too bad it takes $200 to safely remove the rev limit (new coil, arc rod,). and up to $150 to raise the rev limit and give lots more torque(springs and cam).

They have a $50 cam and i think it was a $130 but i believe it's the same as comparing a black mamba to a black mamba jr; torque vs all around except with much more power than a 212 so it is most likely worth it.

i wonder how long these insanely good deals will last.

If it has the limited ignition, a stock unlimited flywheel is 25 dollars, and a stock unlimited coil is 15. That will be sufficient for me to start. This is really for my GF, I will build a second larger one for myself.

The point of this thread is to track my progress and ridiculous ideas.

 

[FreeRunner15]

If it has the limited ignition, a stock unlimited flywheel is 25 dollars, and a stock unlimited coil is 15. That will be sufficient for me to start. This is really for my GF, I will build a second larger one for myself.

The point of this thread is to track my progress and ridiculous ideas.

Spolin' the ol' girlfriend i see.

but unlimited coil and flywheel for less than $30 !?? i need a link or 3 to see this. might just be worth it if all i need is a 40series TC.

 

[Jrgunn5150]

http://www.vegascarts.com/product-p/460flywheel.htm

 

[chancer]

This is really for my GF, I will build a second larger one for myself.

Just build this one exactly the way you want it, Keep telling her it is for her. Then just before it is Finished Break up with her! LOL

Unless she makes Good Samiches

 

[Poboy kartman]

I have no go kart.

i want to get that so bad

Neither of you have a kart, only one of you thinks he does!

 

[FreeRunner15]

Neither of you have a kart, only one of you thinks he does!

i think i've got me a dune-buggy/hillclimber sort of thing goin' on.


Hi-torque 420cc camshaft $50 for ya JR
http://www.vegascarts.com/product-p/tqcam.htm
the one for higher revs is $120 but i bet it'd be monstrous.

---------- Post added at 04:01 PM ---------- Previous post was at 03:51 PM ----------

This is really for my GF, I will build a second larger one for myself.

Those 670's are expensive. unles you mean a real car engine.

The point of this thread is to track my progress and ridiculous ideas.

Nothing wrong with that in my book. i have seen and done things with video proof people say cant be done. People on here will mock and ridicule even if they get proven wrong so just do it lol. Like have you seen a bicycle using 2 pulleys and belts(no torque converter OR clutch just pulleys and belts.) i know you want to see it .. https://www.youtube.com/watch?v=1bndv_NT27w&list=WL&index=47
There was a guy on here a few days ago asking if it could be done . while everyone else is saying no well guess what? i have video proof it can be done. i will take into account possibly depends on the total weight.

The only reason i don't listen is cause of MAINLY older people that would seem they know what they are talking about It's hard to know if they do or dont cause i've proven people wrong many times in life. and times when someone seems correct and later i found out i could've done it even better my way which makes me wish i had.
Know the quote "i'm older therefore i'm wiser " ? i personally think that is one of the most foolish statements out there.

 

[Poboy kartman]

i think i've got me a dune-buggy/hillclimber .




The only reason i don't listen is cause of MAINLY older people know what they are talking about

I think you have a problem with reality. Older people can at least CAPITALIZE.....iiiiiiiii am sick of seeing that....It'll take you 20 years to realize how stupid you really are!

---------- Post added at 04:14 PM ---------- Previous post was at 04:08 PM ----------

Know the quote "i'm older therefore i'm wiser " ? i personally think that is one of the most foolish statements out there.

YOU WOULD...the rest of the human race can learn....and doesn't get STUPIDER every day! And ignoring the knowledge of age and and experience is one of the reasons you are a pathetic mental joke!!!

 

[Jrgunn5150]

No, I have either a GSXR600 or a Raptor 660 I can use on my minibuggy. If her's get's around well with the 420 and Hi/Lo trans, I may consider using a Brigg's 16hp engine.

I bought another fullsize truck today, so that will cut further into my Kart fund lol.

 

[Jrgunn5150]

Looks like I'm up for delivery tomorrow. Look for pics early Thursday morning/late Wednesday night.

 

[Slo-Poke]

I'm building a buggy and am looking at the same engine. What torque converter do you plan to use?

 

[Jrgunn5150]

I'm building a buggy and am looking at the same engine. What torque converter do you plan to use?

A 40 series blast on a modified Polaris Transmission.


Apparently I was sleeping when FedEx came today

 

[Jrgunn5150]

I was asleep again today lol, but I was up the second time he came by, we're old friends the Fedex guy and I anyway.

It has neither the charcoal can no electronic ignition of the electronically limited Lifan's, so it should be good to whatever the springs can handle when the governor comes off.