Manco Warrior 720L Driven replacement recommendation

ptrumblejr

New member
Messages
10
Reaction score
10
I Broke my jack-shaft and it looks like it damaged the Driven. I thought it was just a 40 Series but Gopowersports is saying it doesn't fit. What is the proper replacement for 5/8 shaft? it has the 10hp Subaru motor.
 

ptrumblejr

New member
Messages
10
Reaction score
10
it sure looks like a standard 40 series
 

Attachments

  • 20240429_174942[1].jpg
    20240429_174942[1].jpg
    1.2 MB · Views: 8
  • 20240429_175002[1].jpg
    20240429_175002[1].jpg
    1 MB · Views: 12
  • 20240429_175020[1].jpg
    20240429_175020[1].jpg
    1 MB · Views: 11
  • 20240429_175046[1].jpg
    20240429_175046[1].jpg
    1 MB · Views: 12

ptrumblejr

New member
Messages
10
Reaction score
10
This doesn't look right to me
 

Attachments

  • 17144611419668626342894647388727.jpg
    17144611419668626342894647388727.jpg
    814.6 KB · Views: 9
  • 17144611843451290107104071101770.jpg
    17144611843451290107104071101770.jpg
    960.8 KB · Views: 9

Denny

Canned Monster
Messages
8,596
Reaction score
4,838
Location
Mayberry, Indiana
And yet it is right. It looks as though that clutch was really rusty at one time though and may have some pitted and worn parts in it. Amazon is your cheapest bet for a new one. Also make sure to use a Genuine Comet belt with it. The cheap belts don’t hold up nearly as well as the Comets do! By a factor of over 10-1.
 

Denny

Canned Monster
Messages
8,596
Reaction score
4,838
Location
Mayberry, Indiana
Looks like you will need new wear buttons also. Make sure you get the same diameter as the one you have. They come in 6” and 7”.
 
Top