Manco sprocket

[Possom Point]

Does anyone know where I can find a Manco sprocket for a 2 seater dingo?
My daughter was driving it and the chain popped off and messed up the sprocket.
I would like to find a steel/aluminum blank and attempt to drill the hole pattern.
This kart has the “Differental” style axle , an axle swap would be best but not putting $350+ in a kart. Here are some pics for reference…. 8 holes not the typical 6

 

[ezcome-ezgo]

How many teeth on that sprocket? Is it a Peerless differential? The 8 holes are throwing me off.

 

[Possom Point]

How many teeth on that sprocket?

54

 

[ezcome-ezgo]

What pitch?

 

[Possom Point]

Not sure. I have a #40 chain on it. So I’m assuming what a #40/420 pitch would be…..

 

[ezcome-ezgo]

Can you share a pic of the existing axle?

 

[Possom Point]

 

[ezcome-ezgo]

This has the specs you need, but you'd have to get the bore machined out to the size of your old one, plus the holes. Always the holes.

40X54 Weld Sprocket 54 Teeth for #40 Roll Chain, Fits X Series Weld Hub* | eBay

40X54 Weld Sprocket. This is a new weld sprocket. Hub sold seperatly. Fits X Series Weld Hub 2" Dia Hub. These are Flat Plate Steel Weld Sprockets. Fits #40 Roller Chain.

www.ebay.com

 

[ezcome-ezgo]

BOOM

217220A - 54 Tooth, 41 pitch sprocket for Differential

54 Tooth, 41 pitch sprocket for Differential

www.mfgsupply.com

 

[Hellion]

BOOM

217220A - 54 Tooth, 41 pitch sprocket for Differential

54 Tooth, 41 pitch sprocket for Differential

www.mfgsupply.com

Fine work, EZ. I'd buy two, maybe, and add more things to your kart to take advantage of that 6.99 flat rate shipping charge.

 

[Possom Point]

BOOM

217220A - 54 Tooth, 41 pitch sprocket for Differential

54 Tooth, 41 pitch sprocket for Differential

www.mfgsupply.com

Apparently I didn’t look hard enough. I’ve ordered from them in the past getting a kart wheel from them. Thank you my good man!!!!

 

[Possom Point]

I believe this is my axle….. I can’t believe you found that. Could have saved me $300 when I did my Manco 813 back in 2022.

https://www.bmikarts.com/PDF/Comet/Comet_Axle_and_Sprocket_Assembly_Instructions.pdf

 

[ezcome-ezgo]

If you are fond of diff axles, I know a place you can get them for less than $40. plus shipping.

 

[Hellion]

If you are fond of diff axles, I know a place you can get them for less than $40. plus shipping.

I'll pretend I'm interested. Where can ya get them?

 

[ezcome-ezgo]

I'll pretend to tell you:

35" Differential Stewart Manufacturing Corporation 50-000059 | Differentials | Transaxles, Transmissions, Differentials | Power Transmission | www.surpluscenter.com

35 Differential Stewart Manufacturing Corporation 50-000059, Differentials, DIFFERENTIAL New, STEWART MANUFACTURING CORPORATION 50-000059 35Stewart Manufacturing Corporation,50-000059,

www.surpluscenter.com