manco intruder 2 needs a belt
- Thread starter robargec
- Start date
- Status
I'll just copy the last answer I gave 
Manco part# 5959
slightly different than the next Comet belt (part# 203589A)
O.C is 27.40" as opposed to 27" (so watch out on amazon or so)
find it here:
http://gokartsupply.com/tcbelts.htm
the clutch is a Comet series 30 torque converter (driver and driven combo needed)
if you need spares or parts only.. try mfgsupply.com
if you need a complete set, find it on ebay (chinese copys are cheap but still reliable)
'sid
Manco part# 5959
slightly different than the next Comet belt (part# 203589A)
O.C is 27.40" as opposed to 27" (so watch out on amazon or so)
find it here:
http://gokartsupply.com/tcbelts.htm
the clutch is a Comet series 30 torque converter (driver and driven combo needed)
if you need spares or parts only.. try mfgsupply.com
if you need a complete set, find it on ebay (chinese copys are cheap but still reliable)
'sid
the Torque converter IS the clutch!
(you either have a centrifugal clutch OR a torque converter on a go kart.. not both)
The TC consists of two crucial parts, the driver clutch (the variable pulley that mounts to the engine PTO shaft) and the driven pulley (the one on the jackshaft) [those two are conencted by the belt you're about to order]
IDK what you have, what you need, what's missing if anything at all.
So, maybe post some pics to let us know.
'sid
(you either have a centrifugal clutch OR a torque converter on a go kart.. not both)
The TC consists of two crucial parts, the driver clutch (the variable pulley that mounts to the engine PTO shaft) and the driven pulley (the one on the jackshaft) [those two are conencted by the belt you're about to order]
IDK what you have, what you need, what's missing if anything at all.
So, maybe post some pics to let us know.
'sid
I really hope i dont need a clutch for it i just bought the machine and was told bye the previous owner it needed a clutch but when i went to check it out it is brand new still has the nipples on the tires, but no belt, it runs great and im hoping it just needs a belt but we will see after i get a good look and see what i got
show us a pic, we tell you what you'll need
(remove the cover first.. so we see the drivetrain of course)
'sid
(remove the cover first.. so we see the drivetrain of course)
'sid
If all it needs is a belt, then you don't need a TC. Pics would confirm it though
Well i took the pullys apart and made sure everything was in good working order which it was, some emery cloth and it all is cleaned up,and i will be getting the belts delivered today. Drained all the old gas and put a new spark plug in it and it runs great,
you disassembled the driven?
Do not forget to preload the spring correctly when putting it back together!
turn the cam clockwise into the next valley tightening the spring; push the cam down and lock it with the snap ring.
'sid
Do not forget to preload the spring correctly when putting it back together!
turn the cam clockwise into the next valley tightening the spring; push the cam down and lock it with the snap ring.
'sid
Awesome
- Status