manco 706b rebamf

[gman3850]

well because im getting ready to build one from the fround up i decided to use this as my contest buggy. well as ive posted before i picked up a 706b for pretty cheap but that was because basicaly it was just a frame.

 

[n1kogr]

ooooo i like where this is going keep us updated! Also thanks for posting up lots of pics we love pics!

 

[machinist@large]

ooooo i like where this is going keep us updated! Also thanks for posting up lots of pics we love pics!

 

[gman3850]

well didnt get very far on the pretty much only got to work on it for 4 days because of travel work and school but i have picked up a new motr for that i think will get the job done.

this is a 2000 polaris xc700 with 775 big bore kit, should put down about 150 hp not sure on tq. im trying to figure out how to use chain drive with reverse kit, anyone got a sugestion

 

[exenos]

All I'm going to say is NO. Don't do it. What you are talking about is sheer suicide. In proper buggy, yes that engine is fine but in a manco? We're talking light built kart here.

 

[OzFab]

should put down about 150hp

Drop the 0 off the end & that's about what that frame can handle, maybe a bit more but, not ten times more...

 

[landuse]

Your frame is going to twist like a pretzel

 

[Doc Sprocket]

Am I the only one not seeing the entry sign?

 

[landuse]

Am I the only one not seeing the entry sign?

Dang!! I did not even spot that this is in the Contest Area. There are also just a small handful of days left to the closing date

 

[gman3850]

brng this back from the dead but got to working on it last few days, didnt take many pictures but here is where she sits

mean stance, hoping this to be ride height

ended up picking up a 13hp honda for 25 bucks from buddy, needed a new carb and air filter so it got a genuine honda replacement and a k&n filter. also as u can see making a new basket for motor

needs front bracing to and mounting shocks to top of the a arms so the rack and pinon can sit down in the bottom

dont think these are breaking anytime soon. yes i know the mounting brakets look hideous. This what i get for letting my buddy nake them when i was out getting lunch and he welded them on befor i got back

 

[OzFab]

I really hope there's some bracking going in across the front between the A arms

 

[gman3850]

got a few more things done today, everything in the back is just tacked in place

 

[KartFab]

Looks good. Looks like its missing a 40 series torque converter/jackshaft set up. That would be perfect for that engine (yes i do love those engines, and torque converters).

 

[gman3850]

havnt been on in awhile but had no time because of school and work, but yesterday and today got the front suppenison all tied up so its standing by its own power.

anyone know the best way to add steering to this.

 

[gman3850]

got the 40 series in and mocked up a little. I need to do some welding, fine tunning and adjust some stuff but shouldnt be to difficult

 

[ginoz28]

What happened to that 2 stroke?



Sent from my HTCONE using Tapatalk

 

[gman3850]

sold it and help pay for the price tag of building my 2.0 Porsche motor

 

[Poboy kartman]

It appears you have two different sized sprockets????? The one on the axle looks like a #35 while the other looks like a #40.....What's up with that?

 

[gman3850]

both were sold to me as #41

 

[Poboy kartman]

Then they both should measure 1/2" tooth center to tooth center and be the same thickness. ....