Manco 445lxt

Status
Not open for further replies.

Thunderace4

New member
Messages
3
Reaction score
0
I have a manco go kart, 445 lxt and the motor is getting a tired. I would like to replace the motor. The motor on it now is a b/s 5 hp model 135212 type 0006-02 code 9404292e. My question is has anyone put a new motor in kart like this and what motor did you use that dropped right in and did not require any modification? Thank you for your replies.
 

OzFab

Well-known member
Messages
15,615
Reaction score
76
Location
Warwick Qld, Australia
This question has been answered hundreds of times, any "small block" industrial engine (B&S, Honda/clone, Subaru, etc) will bolt straight on; if you provide your location we could even help you search...
 

Thunderace4

New member
Messages
3
Reaction score
0
Thank you for the assistance, I am in Union, NJ. I appreciate the help and I guess I can't use the search function the right way. This is my first foray into karts. This one was given to me by a family member. The motor in it now has broken studs and bolts in the head and on the crank cover etc. the bolts holding the air cleaner housing to the carb are snapped off in the carb. So I feel that the easier and probably cheaper route will be to replace the motor. Thanks.
 

landuse

Moderator
Staff member
Messages
18,804
Reaction score
613
Location
Pietermaritzburg, South Africa
Post up a pic or two of the engine as well. We love pics :D. I would get the Predator 212cc engine from Harbour Freight. They are used by most kart enthusiasts on this site. What type of clutch do you have? Is it a centrifugal clutch or a torque converter. The Predator engine has a shorter output shaft then most engines, so you will have to take this into account when mounting your clutch. If you have a TC, you will need a longer bolt to bolt it to the shaft. You might also need to move the axle sprocket to line up with the clutch due to the shortness of the crank
 
Status
Not open for further replies.
Top